SETUPANDADJUSTMENTSFOR

YAZOO/KEESKUTTER32",36"AND48"COMMERCIALMOWERS

FRONTCASTERWHEELS

1.Mount front caster wheel assemblies. Installation includes fastening casters to front of the cutter deck using 3/8 x 1" hex head capscrews.

FUELTANK

1.Mount fuel tank to tank support. Secure with the two tank straps, four 1/4" bolts, and four 1/4" nuts. Tighten until snug, but do not over tighten or crush the tank.

HANDLEASSEMBLY

1.Align the upper mounting holes in handle with the upper hole in the tank support.

2.Install two 3/8" x 1" screws through matched holes and loosely install 3/8" nuts.

3.Align the lower holes and install hardware as above, tighten upper and lower hardware.

LINKAGEINSTALLATION

1.Install traction linkage to swivels in bellcrank mounted to the tank support on each side of the mower. Traction linkages are located on the upper handle, fastened to the traction levers. To fasten linkage to swivel, first disconnect linkage from traction levers, then screw linkage into swivel. Reassemble linkage into traction lever.

2.Install shifter to transmission with 1/4" x 1" screws. The shifter is located in the inner box and hardware is preassembled into the bracket on the transmission.

3.Install blade control rod into the bellcrank on the left side of the tank support. Secure rod with ring type retainer.

4.Refer to the section of this manual on adjustments for the proper adjustment of the linkages you are installing.The linkages were set at the factory but must be checked before operating mower to insure of the proper setting. Always check 100% of the adjustments before you operate the mower.

5.Connect the two halves of the wiring harness together. The four prong connectors have a locking tab that shows which way to line them up and guarantees that they are connected properly when the lock snaps.

6.Install the chute deflector to the side of the mower deck. Bolt it into place using the two 5/16" x 1" screws and nuts preassembled into the mounting tabs on the deck. Tighten the screws very securely with the chute completely covering the discharge opening and tight against the side of deck.

THROTTLEINSTALLATION

1.Connect the throttle cable end to the throttle mechanism on engine, leaving the cable clamp loose. Push throttle lever on console completely forward. Then pull the cable through the clamp on engine and tighten the cable clamp. Move the throttle lever back and forth to ensure proper installation.

GASLINEINSTALLATION

1.The gas line is factory installed on the engine. Attach loose end to fuel tank hose barb and secure with hose clamp.

POSITIONINGTHEFRONTCASTERSPACERS

1.Using the cutting height chart, find the correct number of spacers to be placed under the caster swivel.

2.Remove the lynch pin and washer from the top of caster and reposition spacers to the desired cutting height from the chart. See figure # 2

AXLEHEIGHTADJUSTMENT

1.To adjust rear axle, stop engine and place drive levers in the neutral lock position, remove spark plug wire.

2.Remove lower belt shield from underside of rear deck for better access to axle adjustment bolts.

3.Loosen axle pivot bolts and axle adjustment bolts. See figure # 1.

4.Place a jack under center of rear deck raise the jack slightly so axle adjustment bolts may be removed.

5.With the jack raise or lower the rear deck to the desired position using the chart to ensure proper height. Reinstall the axle adjustment bolts and tighten.

A tapered punch may be used to help align the holes. See figure #1.

NOTE:

It may be necessary to readjust drive and brake linkages.

NOTE:

To achive the best quality cut, the blades should be level with the ground or slightly tipped forward.

4

Page 4
Image 4
Yazoo/Kees KKW32121, KKW36121, KKW36141, KKW48141, KKH48151 manual Fueltank, Handleassembly, Linkageinstallation

KKW32121, KKW36121, KW36141, KW48141, KKH48151, KKW32121, KKW36121, KKW36141, KKW48141, KKH48151 specifications

The Yazoo/Kees KKW series of commercial mowers, including models KKW32121, KKW36121, KKW36141, KKW48141, and KKH48151, exemplify cutting-edge technology and robust design, making them a preferred choice for landscaping professionals and facilities management teams. These mowers are engineered to tackle a variety of turf conditions, offering reliable performance and ease of use.

One of the standout features of the KKW series is the powerful engine configuration. Each model is equipped with a high-performance engine, specifically designed for maximum torque and durability. This ensures that mowing tasks can be completed quickly and efficiently, even in challenging environments. The KKW series delivers the power needed to handle dense grass and tough terrain, providing excellent cutting performance without sacrificing speed.

The cutting decks are another integral characteristic of these mowers. Each model comes with a high-capacity mowing deck, optimized for superior grass clipping management. The decks are designed to provide an even cut, leaving a clean finish while minimizing the time spent on clean-up. The wider decks available in the KKW48141 and KKH48151 models allow for increased coverage, making them ideal for larger commercial properties or frequent mowing requirements.

In terms of maneuverability, the KKW series features a compact design that allows operators to navigate tight spaces and complex landscapes with ease. The responsive steering and stable chassis ensure that users can make precise turns around obstacles, enhancing overall productivity. Comfort is also a key focus; the ergonomic seating and user-friendly controls make for a more enjoyable mowing experience, reducing operator fatigue over extended periods.

Technology integration is another hallmark of the Yazoo/Kees KKW series. These mowers often feature digital displays that provide real-time feedback on performance metrics, including fuel efficiency and service reminders. This helps users maintain equipment and optimize their mowing schedules, ensuring that machines are always operating at peak performance.

Overall, the Yazoo/Kees KKW32121, KKW36121, KKW36141, KKW48141, and KKH48151 models combine power, versatility, and innovative technology to meet the demanding needs of modern landscaping professionals. With their exceptional build quality and advanced features, these mowers are tailored for those who seek reliability and efficiency in their turf management endeavors.