ASSEMBLY
Mounting the Z9
NOTE: This portion of the assembly requires lifting the Z9; two people are required.
Tools Required:
1.9/16" wrench
2.Ratchet
3.9/16" socket
| Upper |
| Frame |
| Hitch |
Hitch |
|
Bracket |
|
Lower |
|
Frame | Wire Lock |
| Pin |
1.Install the Hitch from the Custom Kit accord- ing to the instruction sheet included in that carton.
2.Slide the Z9 into the hitch.
3.Line up holes in the Hitch and Z9 and se- cure with two (2) 3/8” wire lock pins.
4.Position the Hitch Brackets so that they are aligned with the holes on the top plate of the Hitch and the holes in the forward cross bar of the Lower Frame.
5.Secure with four (4) 3/8” x
8
