TECHNICAL GUIDE

AFFINITY MODELS: PV9

GAS-FIRED

CONDENSING / HIGH EFFICIENCY TWO STAGE VARIABLE UPFLOW FURNACES

UP TO 94% AFUE

NATURAL GAS

40 - 120 MBH INPUT

EFFICIENCY

RATING

CERTIFIED

This product was manufactured in a plant whose quality system is certified/registered as being in conformity with ISO 9001.

Due to continuous product improvement, specifications are subject to change without notice.

Visit us on the web at www.york.com for the most up-to-date technical information.

Additional rating information can be found at www.gamanet.org.

036-21584-001 Rev. B (1004)

DESCRIPTION

These Category IV, highly efficient, compact, condensing type furnaces are designed for residential and commercial installations in a basement, closet, alcove, recreation room or garage where the ambient temperature is above 32°F, or higher. They may be either side wall or thru-roof vented using approved plastic type combustion air and vent piping. All units are factory assembled, wired and tested to assure dependable and economical installation and operation.

WARRANTY

Lifetime limited warranty on both heat exchangers to the original purchaser; a 20-year limited warranty from original installation date to subsequent purchaser.

10-year warranty on commercial applications.

5-year limited parts warranty.

FEATURES

Two stage heating operation includes:

-Two stage gas valve

-Two stage inducer operation

-Variable speed ECM blower operation

Provides increased comfort level & very quiet unit oper- ation

Adjustable delay timer allows two stage operation with single stage thermostat

Compact, easy to install, ideal height 40" cabinet

Blower-off delay for cooling SEER improvement.

Easy to connect power/control wiring.

Built-in, high level self diagnostics with fault code display.

Low unit amp requirement for easy replacement applica- tion.

Integrated control module for reliable, economical opera- tion.

High velocity filter and side -return filter rack provided for easy field installation.

May be installed as either two-pipe (sealed combustion) or single pipe vent (using indoor combustion air)

Top intake & vent connection allows installation in narrow locations.

Electronic Hot Surface Ignition saves fuel cost with increased dependability and reliability.

Induced combustion system with inshot main burners for quiet, efficient operation.

No special vent termination kit required.

100% shut off main gas valve for extra safety.

24V, 40 VA control transformer and blower relay supplied for add-on cooling.

Hi-tech tubular aluminized steel primary heat exchanger.

Secondary (condensing) heat exchanger of 29-4C high- grade stainless steel.

Timed on, adjustable off blower capability for maximum comfort.

Solid removable bottom panel allows easy application.

Easy access from front of unit for cleaning, maintenance or service.

Protection from intake, exhaust or condensate blockage.

Insulated blower compartment for quiet operation.

ClimaTraK comfort system allows dealer to customize comfort settings based on regional location.

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

Page 1
Image 1
York PV9 warranty Description, Warranty, Features, Natural GAS, 40 120 MBH Input

PV9 specifications

The York PV9 is a highly efficient and robust air conditioning unit well-suited for both residential and commercial applications. This model stands out due to its reliability, advanced features, and impressive energy efficiency ratings. Designed to cater to a variety of spaces, the PV9 is an ideal choice for homeowners, businesses, and institutional facilities.

One of the main characteristics of the York PV9 is its energy efficiency. It boasts a high Seasonal Energy Efficiency Ratio (SEER) rating, which allows it to provide considerable cooling power while consuming less electricity compared to traditional units. This efficiency not only translates to lower energy bills but also aligns with eco-friendly initiatives aimed at reducing carbon footprints.

Another key feature of the York PV9 is its variable-speed compressor technology. This innovative system enables the unit to adjust its cooling output based on the demand of the environment. As a result, the PV9 can maintain precise temperature control and enhance comfort while minimizing energy consumption. This variable-speed operation also leads to quieter performance, making it a preferable choice for residential areas or quiet office settings.

In addition to its energy efficiency, the York PV9 incorporates advanced air filtration technologies. The unit is equipped with a high-performance air filter that helps remove airborne allergens and particulate matter from the environment. This feature not only improves air quality but also contributes to the well-being of occupants, making it particularly beneficial for those with respiratory conditions or allergies.

Durability and design are also noteworthy aspects of the York PV9. Constructed with high-quality materials, this air conditioning unit is designed to withstand a range of weather conditions, ensuring sustained performance over the years. The sleek and modern design allows it to blend seamlessly into various architectural styles, adding aesthetic value to any space.

Moreover, the York PV9 is compatible with smart home systems, allowing users to control the unit remotely via smartphone applications. This added convenience gives users the ability to adjust settings and monitor energy usage from anywhere, providing both comfort and peace of mind.

In summary, the York PV9 air conditioning unit exemplifies cutting-edge technology, energy efficiency, and user-friendly features, making it an outstanding choice for those seeking dependable climate control solutions. With its combination of advanced compressor operation, high-efficiency ratings, superior air filtration, and durable design, the York PV9 sets a standard in the HVAC industry, promising comfort and sustainability for years to come.