6. Power ON LED
MULTIPLE ES200P's
As well as accommodating the full-range speakers, the parallel input jacks allow many ES200P's to be connected in a string. There is no practical limit to the number of ES200P's that may be connected together.
Full Range | Power Amplifier | Full Range |
Cabinet | Cabinet |
| | | | | Amp In | Amp Out | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
ES200P | ES200P |
SUBWOOFER | SUBWOOFER |
Figure 2
Full Range | Mixer | Full Range |
Cabinet | | Cabinet |
| Line Out | Line Out |
Line Out | |
Amp In | Amp Out |
Amplifier | |
ES200P | ES200P |
SUBWOOFER | SUBWOOFER |
USER NOTE
For normal operation connect the ES200P just like any ordinary speaker along with the full-range speakers. The input level switch should be set to speaker. If the audio source does not have a U ground (a ground pin on the AC cord), the ground lift switch must be set to gnd. The ES200P may be wired before or after the full-range speakers. The ES200P does not alter the signal to the full-range speakers. The ES200P will not draw any power from the amplifier driving the full-range speakers. Please note that an external crossover is not necessary.