Yorkville Sound ES200P Specifications, Power Requirements, Power Amplifier Power internal, Weight

Note: The es200p built-in stand mounting adapter can be used with Yorkville

SW-Teletube accessory to support our E160 cabinets. The support tube can be adusted up to it's full 5'4" extension safely as long as the es200p is not inclined more than 10° (10 degrees).

WARNING: Larger/heavier cabinets should not be used with the stand mount!

Specifications

Power Requirements

North American: 117VAC 60 Hz

260 Watts Maximum

European: 230VAC 50 Hz

260 Watts Maximum

Power Amplifier Power (internal):

200Watts

Frequency response: 50 Hz to 110 Hz Input Impedance: 80 kohms

Speaker components: 10" 2-ohm, 200 Watts

Input Connections:

Tip: Positive

Ring(Shaft): Negative

Grounding:

The sleeves of the input are not grounded except when the input ground switch is set to GND. Grounding is done through a 10-ohm protection device in order to prevent damage due to miswiring.

Limiting:

Clipping, average voice coil current, thermal

Maximum SPL:

125 dB (50 Hz to 110 Hz)

Weight:

54 lb. (24.5 kg)

Dimensions:

(WxDxH): 17.5 x 27 x 14 inches XX... 44.5 x 68.6 x 35.6 cm

3