Yorkville Sound ES700P owner manual

Yorkville

ES700P

Specifications

Power Requirements

120V: 117V-120V AC 60 Hz 2.5A

230V: 230VAC 50 Hz 1.3A

Power Amplifier Power (internal): 700 Watts

Frequency response: 45 Hz to 125 Hz

Input Impedance: 80 kOhms

Speaker components: 2 x 10 inches

Input Connections

Tip: Positive (+ve)

Ring(Shaft): Negative (-ve)

Grounding

The sleeves of the input are not grounded except when the input ground switch is set to gnd. Grounding is done through a 100-Ohm protection device in order to prevent damage due to miswiring.

Limiting

Clipping, excursion and average voice coil current, thermal

Maximum SPL

131 dB (60 Hz to 110 Hz)

Weight

93 lb. (42 kg)

Dimensions

(WxDxH): 24" x 24.5" x 17.5"

61 cm x 62.1 cm x 44.5 cm

Note: The ES700P built-in stand mounting adapter can be used with Yorkville SW-Teletube accessory to support our E160 cabinets. The support tube can be adjusted up to it’s full 5-foot 4-inch extension safely as long as the ES700P is not inclined mor than 10° (10-degrees).

WARNING: Larger or heavier cabinets shound not be used!