Z-Com R1 Extender manual Connect Up, Slide the Sealing Nut from its Breach

Connect Up

Before installing the Ethernet cable with a waterproof RJ-45 connector, it is recommended that the Cat-5 RJ-45 coaxial cable be used for the bridge to power injector connections.

1.To connect to the hole labeled PoE+Data, open the black cover in advance by using a coin or a slotted screwdriver and then screw in the body of the gland and tighten.

2.Slide the sealing nut to the RJ-45 cable from its middle breach and then insert the sealing into the cable.

Slide the Sealing Nut from its Breach

3.Insert the RJ-45 connector and make sure that the locking tab snaps home.

R1 Extender RJ-45 Port

4.Screw the sealing on the gland and tighten.

Chapter 3 System Installation Page 9