![](/images/new-backgrounds/1279783/27978351x1.webp)
Display Stowage
CLOSE GLIDER
The following describes closing and stowage of the Glider in the cabinet.
Pull the Glider all the way out to the stop. Tilt the display head back.
VERY IMPORTANT
Hold the top of the display while rotating the pivot latch. Lift up the display pivot latch.
From the landscape position, rotate the display to the vertical position.
Rotate the display pivot latch
Make sure there is enough room to lower the top of the display head without hitting the cabinet.
Tilt the display head back towards the rear of the rack all the way to the horizontal position.
Lower the display into | Rotate the display latch |
the Glider frame tray. | clockwise to engage the |
| side lock linkage. |
The display latch has now locked the side linkage.
2 6