2After the blowing ends, the heat dispelling fan will continue to run for 3 minutes to drive away hot air. The machine will then turn off automatically. Turn the power switch off if you are not going to use it within a short time.
3If the unit will not be used for a period of time, remove the power cord from electrical outlet.
Maintenance
Exhaust gas vent
Danger
Turn off the unit and remove the Power Cord from the electrical outlet before maintenance to avoid electrical shock.
A Cleaning Condensation
Chamber
1 In areas of high humidity, during |
|
| |
operation, water vapor will condense |
|
| |
and therefore, there is a condensation |
|
| |
chamber in the middle section of the |
| Accumulated water | |
external connection hose. |
|
| |
2 If water in the condensation chamber | Open | Close | |
exceeds 1/3, pour the water out by | |||
|
| ||
gently twisting the condensation |
|
| |
chamber to open it. |
|
|
3 Then lightly shake both the upper and
lower end of the condensation chamber and then
chamber.
4If the water accumulation exceeds more than 1/2, it may cause water backflow and resulting water accumulation on the external connection hose.
5Sometimes excessive water will cause abnormal sounds generated by bubbles and this can be solved by clearing the accumulated water.
9
