cleaned.
11. At the end of the programme
All drying programmes end with a 10 minute cooling phase.
You may remove the laundry after this phase. The lights Filter and Empty Tank, illuminate.
If the laundry is not removed at the end of the cycle, the dryer performs an
The Lights Filter and The Empty Tank remain lit and the buzzer sounds for 2 minutes. Turn the programme selector dial to “Off” to switch the machine off.
Remove the laundry from the drum and carefully check that the drum is empty.
If you do not intend to carry out anoth- er wash, close the water tap. Leave the door open to prevent the formation of mildew and unpleasant smells.
Turn the programme selector dial to “Off”; all the lights go out. The appli- ance is switched off.
12. Remove the laundry.
If you open and then close the door before turning the selector dial to“Off” all the lights corresponding tothe phas- es making up the performed pro- gramme come on.
After each use
•Clean the filters.
•Empty the water reservoir.
gramme selector dial to “Off”. Select the new programme and press the Start button.
Modifying the programme
To change a programme which is run- ning, first cancel it by turning the pro-
12
