Copies of the I/B. Please reproduce them without any changes except under special instruction from Team International USA. The pages must be reproduced and folded in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm height). When folding, make sure you keep the good numbering when you turn the pages of the I/B. Don’t change

Fax +1 305 430 9692 the page numbering. Keep the language integrity. Print only what is inside the frame.

#

1)Check that your scale is on a hard and even surface and that the 4 feet touch the ground.

2)When the scale is turned off, gently push with your foot on the right or left superior corner.

3)The scale will turn on correctly and the LCD display will show “0.0”.

4)Step on the scale (turned on) and remain as still as possible.

5)The stabilized weight is displayed (flashes twice).

6)Step off the scale.

7)The scale turns off automatically.

ERROR INDICATION

If the display shows symbols randomly or if the scale doesn’t turn off automatically, it means that your scale has a problem (wrong initialization or weighing error).

Step off the scale and wait for it to turn off. You can start again.

If the problem goes on, remove the batteries for 10 seconds, and then put them back in place.

OVERLOADING INDICATOR

If the symbol appears on the LCD screen, it means that the maximum weight accepted by your scale is exceeded, please step off in order not to damage your scale.

LOW BATTERY INDICATOR

If the symbol is displayed on the LCD screen, it means that the batteries of your scale should be replaced (see paragraph “Before the first use”).

BATTERY

If your appliance does not work properly, it is probably because the batteries are discharged. In that case, replace them by new ones of the same type (see paragraph “Before the first use”).

Please dispose of the old batteries in an environmentally friendly way.

4

USK EBS 33086 - 111026

Assembly page 4/20

Page 4
Image 4
Kalorik CR-2032 manual Error Indication, Overloading Indicator, LOW Battery Indicator, Assembly page 4/20