depth between 48 and 60 cm.

Read carefully the instructions supplied with the kit.

Door reversal

To make it easier to load or unload the laundry the door can be reversed.

Reversing the door is not possible if after this operation the appliance result installed behind a door with a hinge on the opposite side to that of the appliance.

Important:

This operation must be carried out by

Important:

Should the appliance power supply cable need to be replaced, this must be .carried out by our Service Center.

Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance’s rating plate.

The appliance is supplied with a 13amp plug fitted.

In the event of having to change the fuse in the plug supplied, a 13amp ASTA approved (BS1362) fuse must be used.

Should the plug need to be replaced for any reason, proceed as described below.

The wires in the mains lead are coloured in accordance with the following code:

Green and Yellow

- Earth

Blue

- Neutral

Brown

- Live

GREEN & YELLOW

E

qualified personnel.

Please contact the nearest Service Centre.

N

13 A

L

Electrical connection

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

WARNING:

THIS APPLIANCE MUST BE EARTHED.

The manufacturer declines any liability should this safety measure not be observed.

BROWN

BLUE

P1041

CORD CLAMP

 

Important:

The plug must be accessible after the appliance has been installed.

Important:

The manufacturer declines any responsibility for damage or injury through failure to comply with the above safety precautions.

21

Page 21
Image 21
Zanussi ZDC 47100 W, 136905611-00-02092008 user manual Electrical connection, Door reversal