Zanussi 240208, 240229, 240203, 240225, FCF-20 1/1 dimensions Optional Accessories, Accessories Models

FORCED AIR CONVECTION OVENS

FCF-20 1/1

�Main switch/Cooking mode selector which can be used to set: ON/OFF, convection without humidification and convection with humidification (choice of 5 different humidity levels). Rapid cooling of the oven by air with the door open. The oven is designed to be fitted with a probe which is available as an accessory

�A series of automatic and manual controls, are supplied as standard, which allows a lot of oven operations to be automated without hindering the creativity of the chef

�Main switch/Cooking mode selector which can be used to set: ON/OFF, convection without humidification and convection with humidification (choice of 5 different humidity levels). Rapid cooling of the oven by air with the door open. The oven is designed to be fitted with a probe which is available as an accessory

�Presence of a thermometer for a quick check of the temperature inside the cooking chamber

�Gas models are supplied for use with natural gas, with LPG conversion jets supplied as standard

�Side lighting system using normal bulbs; turn handle door opening and closing system

�Electromechanical thermostat with an operating temperature adjustable from 30°C to 300°C with a visual display to show the oven is working and the temperature in the chamber. Timer to set the cooking time, adjustable up to 120 minutes or for continuous operation with an acoustic alarm to show the cycle has finished. At the end of the set cooking time the heat and the fan are automatically switched off

�The humidity level can be set by selecting one of the 5 levels shown on the control panel; it functions by injecting water into the cooking chamber for a few seconds every minute. Thermometer for controlling the temperature in the cooking chamber

�The 60-mm pitch roll-in rack is included. The accessory on request, fat filter for gas oven mod. FCFGFG10, must be ordered in 2 pieces

�All models comply with the standards required by the main international approval bodies and are H marked

*In accordance with H regulations for gas models belonging to Class B11 (power over 14 kW), it is necessary to install a chimney (if installed under a hood) or chimney and draft diverter if the waste gases are vented directly outside.

OPTIONAL ACCESSORIES
ACCESSORIES		MODELS
	FCF201G	FCF201GMS	FCF201E	FCF201ENS
	240203	240225	240208	240229
2 FAT FILTERS FOR 20X1/1 & 2/1 OVEN			922179	922179
60-MM PITCH ROLL-IN RACK FOR 20X1/1	922203	922203	922203	922203
80MM PITCH ROLL-IN RACK 14X1/1GN	922205	922205	922205	922205
AUTOMATIC WATER SOFTENER FOR OVENS	921305	921305	921305	921305
BASE FOR 20X1/1 ROLL-IN RACK	922141	922141	922141	922141
EXTERNAL SIDE SPRAY UNIT	922171	922171	922171	922171
FAT FILTER FOR GAS OVENS 10&20X1/1-2/1	921700	921700
FLUE CONDENSER FOR GAS OVEN 20X1/1	921710	921710
FRYING GRIDDLE GN 1/1 FOR OVENS	922215	922215	922215	922215
PAIR OF 1/1 GN AISI 304 S/S GRIDS	921101	921101	921101	921101
PAIR OF 1/2 GN PAN SUPPORT SHELVES	921106	921106	921106	921106
PROBE FOR OVENS 20X1/1-2/1	921704	921704	921704	921704
RESIN SANITIZER FOR WATER SOFTENER	921306	921306	921306	921306
THERMAL BLANKET F.HOLDING STATION 201/1	922149	922149	922149	922149	ZANUSSI
THERMAL JACKET FOR SLIDE-IN RACK 20X1/1	922158	922158	922158	922158
TROLLEY FOR 20X1/1 ROLL-IN RACK	922132	922132	922132	922132
WATER FILTER FOR OVENS 0.8 L/MIN.	922186	922186	922186	922186	P R O F E S S I O N A L

www.zanussiprofessional.com

BCAE1 2009-06-25 The Company reserves the right to alter technical specifications without prior notice.