INSTALLATION

Please ensure that when the appliance is installed it is easily accessible for the engineer in the event of a breakdown.

Important

IF YOU ARE DISCARDING AN OLD APPLIANCE THAT HAS A LOCK OR CATCH ON THE DOOR, YOU MUST ENSURE THAT IT IS MADE UNUSABLE TO PREVENT YOUNG CHILDREN BEING TRAPPED INSIDE.

Important

It must be possible to disconnect the appliance from the mains power supply; the plug must therefore be easily accessible after installation.

Depending upon the position which you choose for your appliance, you may wish to reverse the way in which the door opens. To do this, refer to instructions on “Door reversal”.

Positioning

This appliance should only be installed at a location where the ambient temperature corresponds to the climate classification indicated on the rating plate, which is located at the left on the inside of the appliance.

The following table shows which ambient temperature is correct for each climate classification:

SN +10°C to + 32°C

N+16°C to + 32°C

ST +18°C to + 38°C

T+18°C to + 43°C

It should be located in a dry atmosphere, out of direct sunlight and away from extreme temperature e.g. not next to a boiler or radiator, or in a very cold room e.g. an outhouse, where the temperatures may fall below 10°C (50°F). If these temperatures are exceeded i.e. colder or warmer, then the appliance may not operate correctly.

You should also ensure that air can circulate freely around the back and the top of the cabinet. There must also be at least 100 mm (4”) distance between the top of the cabinet and any overhanging kitchen furniture (A). Ideally, the appliance should not be positioned beneath overhanging furniture (B).

There should also be a gap of 25 mm either side of the appliance. Do not obstruct the space underneath. The back of the cabinet may be placed close to the wall but must not touch it. DO NOT install in places with restricted ventilation.

Adjust the level of the appliance by screwing out the adjustable foot, or feet, at the bottom of the cabinet using your fingers or a tool ( see figure) .

Rear spacers

The plastic bag containing all relevant documentation also contains two spacers to be fitted into special holes in the back of the appliance.

Fit the spacers into the holes, taking care to ensure that the arrow (A) is positioned as shown in the diagram. Then turn them through 45° (arrow (A) vertical) until they lock into place.

100 mm

 

A

B

10 mm

10 mm

NP00

 

D200

 

A

45°

PR60

14

Page 12 Page 14
Page 13
Image 13
Zanussi CZC 17/6 A manual Installation, Positioning, Rear spacers
Page 12 Page 14

CZC 17/6 A specifications

The Zanussi CZC 17/6 A is a remarkable refrigerator that combines efficiency, functionality, and sleek design to meet the needs of modern households. This appliance exemplifies Zanussi's commitment to innovation while providing reliable cooling solutions.

One of the standout features of the CZC 17/6 A is its impressive energy efficiency. It falls within an excellent energy rating category, ensuring that it consumes minimal power while providing optimal cooling performance. This not only helps users save on electricity bills but also contributes positively to environmental sustainability.

The refrigerator has a spacious interior layout that maximizes storage potential. With adjustable shelves and compartments, it offers flexibility in organizing food items. The door baskets are designed to accommodate larger containers, making it easy to store everything from bottles to jars. This thoughtful design ensures that users can make the most of the available space, preventing clutter and allowing for easy access to essentials.

In terms of cooling technology, the Zanussi CZC 17/6 A is equipped with a reliable cooling system that maintains a consistent temperature throughout the unit. This helps preserve food freshness while minimizing spoilage. Additionally, the refrigerator features a fast freezing function, which is especially useful for quickly freezing large quantities of food items or preserving seasonal produce.

Noise levels are kept to a minimum in this model, thanks to its modern compressor technology, which operates quietly. This is a significant advantage for users who prefer a serene kitchen environment. The sleek design of the CZC 17/6 A enhances its visual appeal, making it a stylish addition to any kitchen setup.

Another notable aspect is its ease of use, with user-friendly controls that simplify temperature adjustments. The refrigerator also features interior lighting, ensuring visibility even in low-light conditions, which adds to the convenience of storing and retrieving items.

Overall, the Zanussi CZC 17/6 A is a versatile refrigerator that brings together energy efficiency, spaciousness, and modern technology. Whether for a family home or a small kitchen, it stands out as an excellent choice, delivering both performance and style. With its thoughtful design and dependable features, this refrigerator aims to make everyday life simpler and more efficient.
Top Page Image Contents