Installation

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.

Remove all packaging before positioning the machine.

If possible, position the machine next to a water tap and a drain.

Levelling

Good levelling is essential for correct closure and sealing of the door. When the appliance is correctly levelled, the door will not catch on the levelling spacers on either side of the cabinet. If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.

Water supply connections

This dishwasher must be plumbed into a cold water supply. The water pressure must be within the limits given in the

"Technical specifications"

section.

Your local Water Authority will advise you on the average mains pressure in your area.

The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation. Do not use, for connection, old hoses which have been used in another appliance.

The locknut must be correctly fitted to avoid water leaks.

Avoid bends or kinks in the hose which could prevent or slow down the water supply.

If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose.

This will prevent deposits of sand or rust clogging the inlet hose.

Water outlet hose connection

The end of the drain hose can be connected in the following ways:

1.To the sink outlet spigot, securing it if necessary with a clip.

IN06

IN07

Attention!

Our appliances are supplied with a with a security device to protect against the return of dirty water back into the machine.

If the spigot of your sink has a "no return valve" incorporated this can prevent the correct

draining of your dishwasher. We advise you therefore to remove it.

2.Hooked over the edge of the sink using the special

curved plastic guide (

if provided

).

3.To a stand pipe provided with vent-hole, minimum internal diameter 4 cm.

 

 

1

2

3

Ø

21

 

 

4 cm

Ø

18

 

min

 

 

 

 

 

 

 

 

 

 

max 100 cm

min 30 cm max 100 cm

CS09

 

 

 

 

10

Page 16 Page 18
Page 17
Image 17
Zanussi DA 6141 manual Installation, Levelling, Water supply connections, Water outlet hose connection
Page 16 Page 18

DA 6141 specifications

The Zanussi DA 6141 is an advanced and stylish built-in dishwasher designed to elevate the kitchen experience. Known for its sleek aesthetics and practical functionality, this model is built to cater to the needs of modern households.

At the heart of the Zanussi DA 6141 is its impressive energy efficiency. With an A++ energy rating, it not only helps reduce electricity bills but also contributes to a more sustainable environment. This dishwasher uses less water compared to traditional washing methods, ensuring that you can clean a large load without compromising on eco-friendliness.

One of the standout features of the DA 6141 is its adjustable loading options. It comes equipped with a height-adjustable top basket, allowing you to customize the interior space according to the size and shape of your dishes. This flexibility ensures that everything from tall pots to delicate glassware can be safely cleaned in one cycle.

The Zanussi DA 6141 also boasts a variety of wash programs to cater to diverse cleaning needs. With multiple cycles, including eco, intensive, and quick wash options, users can choose the optimal setting based on the load and level of soiling. The quick wash cycle is particularly beneficial for busy households, providing clean dishes in a fraction of the time.

Noise levels are another important consideration for consumers, and the DA 6141 performs impressively with a quiet operation. This model features noise-reduction technology, making it ideal for open-plan living spaces where the dishwasher might be running while family members relax or entertain.

Additionally, the Zanussi DA 6141 is user-friendly, featuring an intuitive control panel that simplifies the selection of wash programs and settings. LED indicators provide clear information on the dishwasher’s status and remaining time, ensuring you’re always in the know.

In terms of design, the dishwasher blends seamlessly into any kitchen decor. Its modern, minimalist look, combined with a stainless-steel finish, complements various kitchen styles, making it both a practical appliance and a stylish addition.

In summary, the Zanussi DA 6141 is characterized by its energy efficiency, adjustable loading options, versatile wash settings, quiet operation, and sleek design. For those seeking a reliable dishwasher that meets the demands of contemporary life, the DA 6141 is an excellent choice. It offers the perfect combination of functionality and style, making the task of washing dishes a breeze.
Top Page Image Contents