Something not working

Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer.

Before contacting your local Service Force Centre, please carry out the checks listed below.

Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation a charge will be made even if the appliance is in guarantee.

Symptom

Solution

 

 

 

 

The machine will not start

 

The door has not been properly closed.

 

 

The plug is not properly inserted in the power socket.

 

 

There is a power failure.

 

 

 

The machine does not fill with water

 

Ensure the water tap is open.

 

 

Ensure the mains water supply has not been cut off.

 

 

The inlet hose may be squashed or bent. Reposition the hose.

 

 

The inlet hose may be blocked. Switch off the water supply and clean

 

 

the filter.

 

 

 

The filters are blocked

 

Clean the filters (refer to "Maintenance and cleaning").

 

 

 

The spray arms are not rotating

 

Ensure the crockery is loaded correctly.

 

 

 

The dishwasher will not drain

 

The drain hose may be squashed or bent. Reposition the hose.

 

 

The sink may be blocked. Clear any blockages.

 

 

The drain hose extension is not correct. Follow the instructions for

 

 

connecting to the waste.

 

 

There is no vent in the end of the drain hose.

 

 

 

The machine is noisy

 

Dishes are rattling against each other, refer to “Loading your machine”.

 

 

The spray arms are knocking against the dishes. Refer to

 

 

"Loading your machine".

 

 

 

The door is difficult to close

 

The dishwasher is not level, or not properly built-in.

 

 

 

Visible lime deposits or white film

 

Check that there is salt and that the salt cap is tight.

on the dishes

 

Check that the right level of the water softener is set.

 

 

 

The dishes are not quite dry

 

The rinse aid has run out or too little is being used.

 

 

 

The dishes are not clean (poor wash)

 

The baskets are too full.

 

 

The dishes have not been arranged properly.

 

 

The spray arms do not rotate

 

 

The spray arms are clogged.

 

 

The filters are clogged.

 

 

The filters are not in the correct position.

 

 

Not enough detergent has been used or it is unsuitable.

 

 

The detergent is old or has gone hard.

 

 

The salt container cap is not properly closed.

 

 

The washing programme selected is too gentle.

 

 

 

If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model and serial number. This information can be found on the

rating plate located on the right hand side of the dishwasher door.

This product should be serviced by an authorised Service engineer, and only genuine spare parts should be used.

Under no circumstances should you attempt to repair the machine yourself.

Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Force Centre. Always insist on genuine spare parts.

 

Prod.No.

........ Ser. No

Mod.

........

 

RA01

 

 

9

Page 16
Image 16
Zanussi DA 6141 manual Something not working, Symptom

DA 6141 specifications

The Zanussi DA 6141 is an advanced and stylish built-in dishwasher designed to elevate the kitchen experience. Known for its sleek aesthetics and practical functionality, this model is built to cater to the needs of modern households.

At the heart of the Zanussi DA 6141 is its impressive energy efficiency. With an A++ energy rating, it not only helps reduce electricity bills but also contributes to a more sustainable environment. This dishwasher uses less water compared to traditional washing methods, ensuring that you can clean a large load without compromising on eco-friendliness.

One of the standout features of the DA 6141 is its adjustable loading options. It comes equipped with a height-adjustable top basket, allowing you to customize the interior space according to the size and shape of your dishes. This flexibility ensures that everything from tall pots to delicate glassware can be safely cleaned in one cycle.

The Zanussi DA 6141 also boasts a variety of wash programs to cater to diverse cleaning needs. With multiple cycles, including eco, intensive, and quick wash options, users can choose the optimal setting based on the load and level of soiling. The quick wash cycle is particularly beneficial for busy households, providing clean dishes in a fraction of the time.

Noise levels are another important consideration for consumers, and the DA 6141 performs impressively with a quiet operation. This model features noise-reduction technology, making it ideal for open-plan living spaces where the dishwasher might be running while family members relax or entertain.

Additionally, the Zanussi DA 6141 is user-friendly, featuring an intuitive control panel that simplifies the selection of wash programs and settings. LED indicators provide clear information on the dishwasher’s status and remaining time, ensuring you’re always in the know.

In terms of design, the dishwasher blends seamlessly into any kitchen decor. Its modern, minimalist look, combined with a stainless-steel finish, complements various kitchen styles, making it both a practical appliance and a stylish addition.

In summary, the Zanussi DA 6141 is characterized by its energy efficiency, adjustable loading options, versatile wash settings, quiet operation, and sleek design. For those seeking a reliable dishwasher that meets the demands of contemporary life, the DA 6141 is an excellent choice. It offers the perfect combination of functionality and style, making the task of washing dishes a breeze.