The current level is indicated by the number of |
| ||||
flashes made by the | INTENSIVE SID 80 | indicator | |||
light, that alternates 5 seconds off with a number of |
| ||||
flashes, this for about 60 seconds. |
| ||||
Example: |
|
|
|
| |
1 | flash | = | level 1 |
|
|
2 | flashes | = | level 2 |
|
|
3 | flashes | = | level 3 |
|
|
4 | flashes | = | level 4 |
|
|
5 | flashes | = | level 5 |
|
|
3. To change the level, press the |
| INTENSIVE SID 80 | ||
programme push button. Each time the push |
| |||
button is pressed the level changes. |
|
| ||
Example: |
|
|
| |
if the current level is 3, by pressing the | INTENSIVE | |||
SID 80 | programme push button once, level 4 is | |||
selected. |
|
|
| |
The | INTENSIVE SID 80 | indicator light remains off | ||
for about 5 seconds after which it starts flashing indicating the new level selected.
4.To memorise the new level, switch off the
dishwasher by pressing the | push button. |
If your water is level 1 it is already soft and therefore there is no need to use salt. With the setting of the water softener at level 1 the salt indicator light on the control panel will always remain off.
Use salt from level 2 upwards.
From level 2 upwards, if salt refilling is necessary, the salt indicator light will illuminate only in setting mode and at the end of the washing programme.
During the run of the programme it will remain off.
7
