The cutlery basket
Long bladed knives stored in an upright position are a potential hazard. These items should only be placed in the removable knife basket.
Take care when loading or unloading sharp items such as knives.
Removable knife basket
Long and/or sharp items of cutlery such as carving knives must be placed horizontally in the removable knife basket provided, to be positioned at the rear of the upper basket.
Cutlery should be placed in the removable cutlery basket with the handles facing downwards. If the handles protrude from the bottom of the basket, obstructing the lower spray arm, load the cutlery with the handles facing upwards.
Mix spoons with other cutlery to prevent them from sticking together.
The cutlery basket is in two parts which can be separated to give greater loading flexibility. To separate the two parts, slide them horizontally in opposite directions and pull them apart. To reassemble, reverse the procedure.
For best results we recommend you to use the
cutlery grids provided (if the size and dimensions of the cutlery allow it).
The upper basket
The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 25 cm in diameter), salad bowls, cups and glasses.
Arrange items on and underneath the cup racks so that water can reach all surfaces.
Glasses with long stems can be placed upside down in the raised cup racks.
Light items (plastic bowls etc.) should be loaded in the upper basket and arranged so they do not move.
Before closing the door, ensure that the spray arms can rotate freely.
UI53 |
UI62 |
UI63
US47 |
11
