Cutlery should be placed in the removable cutlery basket with the handles facing downwards. If the handles protrude from the bottom of the basket, obstructing the lower spray arm, load the cutlery with the handles facing upwards.
Mix spoons with other cutlery to prevent them from sticking together.
Adjusting the height of the upper basket
If washing very large plates you can load them in the lower basket after moving the upper basket to the higher position.
Maximum height of the dishes in | |
upper basket | lower basket |
For best results we recommend you to use the cutlery grids provided (if the size and dimensions of the cutlery allow it).
The cutlery basket is in two parts which can be separated to give greater loading flexibility. To separate the two parts, slide them horizontally in opposite directions and pull them
UI63 |
With upper basket raised | 20 cm | 31 cm |
|
|
|
With upper basket lowered | 24 cm | 27 cm |
|
|
|
To move to the higher position proceed as follows:
1.Pull out the basket until it stops.
2.Carefully lift both sides upwards until the mechanism is engaged and the basket is stable.
apart.
To reassemble, reverse the procedure.
UI62 |
Attention!
Never lift or lower the basket on one side only
When the basket is in the higher position you will not be able to use the cup rack(s).
RC08 |
The upper basket
The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 24 cm in diameter), salad bowls, cups and glasses.
Arrange items on and
underneath the cup racks so that water can reach all surfaces. Glasses with long stems can
be placed upside down in the cup racks.
For taller items, the cup |
|
racks can be folded upwards. | US47 |
Light items (plastic bowls |
|
etc.) must be loaded in the |
|
upper basket and arranged |
|
so they do not move. |
|
| US73 |
In case that plates are loaded in the upper basket:
To lower the basket to the original position proceed as follows:
1.Pull out the basket until it stops.
2.Carefully lift both sides upwards and then allow the mechanism to drop back down slowly, keeping hold of it.
After loading your machine always close the door, as an open door can be a hazard.
load them starting from the rear positions of the basket; tilting them slightly forwards and avoiding the front positions near the door.
US71 |
Before closing the door, ensure that the spray arms can rotate freely.
9
