![Description of the appliance](/images/new-backgrounds/46002/460027x1.webp)
Description of the appliance
1.Upper basket stop
2.Water hardness switch
3.Salt container
4.Detergent dispenser
5. Control panel
6.Rating plate
7.Rinse aid dispenser
8. Filters
9.Lower spray arm
10.Upper spray arm
11. Upper basket
12.Worktop
IN144
The control panel
Function push buttons: in addition to the dishwashing programme selected, the following functions can also be set with the help of these buttons: water softener setting, deactivation/activation of the inflow of rinse aid and the cancelling of a programme in progress.
Half load option push button: this option is useful and economical when only a few dishes need washing.
This option can be linked only to a some programmes (pressing the half load push button the indicator light will illuminate).
With programmes Quick 60° and Rinse & Hold the half load option is automatically deactivated (if the half load push button is pressed, the indicator light remains off).
Load all the dishes into both baskets.
When using this option remember to reduce the dose of detergent that is normally used for a complete load.
Indicator lights: have the following meanings:
salt refilling indicator light, illuminates when the salt has run out
rinse aid refilling indicator light, illuminates when the rinse aid has run out
The salt and rinse aid indicator lights are never illuminated while a washing programme is running even if filling with salt and rinse aid is necessary.
Phase indicator lights: have the following meanings:
WASH | illuminates when the washing phase is running |
|
|
DRY | illuminates when the drying phase is running |
|
|
END | illuminates when the washing programme has |
| ended. |
| It also has added functions of visual signalling as: |
| - the setting of the water softener |
| - deactivation/activation of the inflow of rinse aid |
| - intervention of an alarm due to malfunction of the |
| machine. |
|
|
As soon as you select a washing programme, the phase indicator lights for that programme will start flashing.
As the programme starts, the phase indicator lights turn off except for the indicator light of the phase in progress which will remain lit with a static light.
4