Installation instructions

Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person.

Remove all packaging before positioning the machine.

If possible, position the machine next to a water tap and a drain.

Fitting under a counter

(kitchen worktop or sink)

By removing the machine’s worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to those shown in the picture.

570

-

 

600

820

 

600

 

IN05

 

Proceed as follows:

Remove the machine’s worktop by unscrewing the two rear retaining screws, pull from the front and slide out the rear slots, lifting the worktop.

Insert the machine after adjusting height and levelling with the adjustable feet. When inserting the machine, ensure that the water inlet and drain hoses are not kinked or squashed.

If the dishwasher is later used as a free-standing appliance, the original worktop must be re-mounted.

The plinth on free-standing appliances is not adjustable.

Levelling

Good levelling is essential for correct closure and sealing of the door.

When the appliance is correctly levelled, the door will not catch on either side of the cabinet.

If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.

Water supply connections

This dishwasher must be plumbed into a cold water supply.

For making the connection itself, the coupling nut fitted to the machine’s supply hose is designed to screw onto either a 3/4" inch gas thread spout or to a purpose made quick-coupling tap such as the Press-block.

The water pressure must be within the limits given in the "Technical specifications". Your local Water Authority will advise you on the average mains pressure in your area.

The water inlet hose must not be kinked, crushed, or entangled when it is being connected up.

The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation by means of the locknut. (Attention! NOT all models of dishwashers have fill and drain hoses provided with locknut. In this case, this kind of facility is not possible).

The locknut must be correctly fitted to avoid water leaks.

If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose.

Do not use, for connection, old hoses which have been used in another appliance.

The dishwasher is fitted with safety devices that prevent the wash water returning into the drinking water system and comply with the applicable plumbing regulations.

19

Page 18 Page 20
Page 19
Image 19
Zanussi DE 6855 manual Installation instructions, Fitting under a counter, Levelling, Water supply connections
Page 18 Page 20

DE 6855 specifications

The Zanussi DE 6855 is a modern and efficient dishwasher designed to meet the needs of contemporary households. With a focus on usability, performance, and energy efficiency, this model stands out as a reliable appliance for busy kitchens.

One of the standout features of the Zanussi DE 6855 is its impressive capacity. It comfortably accommodates up to 13 place settings, making it ideal for families or those who enjoy entertaining guests. The adjustable rack system allows users to customize the interior layout to fit larger pots and pans, maximizing space and ensuring that every dish is thoroughly cleaned.

In terms of technologies, the Zanussi DE 6855 employs advanced cleaning systems that ensure optimal results. The AquaStop feature provides an added layer of safety, preventing leaks and potential water damage. Additionally, the machine incorporates a highly efficient filtration system that captures food particles, enhancing washing performance and prolonging the life of the appliance.

Energy efficiency is another key characteristic of the DE 6855. It boasts an A++ energy rating, signifying lower power consumption without compromising cleaning effectiveness. This not only translates to cost savings on energy bills but also aligns with environmentally conscious practices.

The Zanussi DE 6855 offers multiple wash programs tailored to different needs. From intensive cycles for heavily soiled pots to eco-friendly options that save water and energy, users can select the appropriate setting to match their load.

Another notable feature is the delay start option, allowing users to set the dishwasher to begin its cycle at a more convenient time, such as during off-peak electricity hours. This feature is particularly useful for those looking to optimize energy use and save money.

Lastly, the user-friendly interface and intuitive controls make the Zanussi DE 6855 easy to operate. The sleek design fits well in any kitchen decor, while the quiet operation ensures minimal disruption during cycles.

Overall, the Zanussi DE 6855 is a versatile and efficient dishwasher that meets the demands of modern living, combining functionality with energy-saving technologies to deliver exceptional cleaning performance.
Top Page Image Contents