26.RETURN button (P.27)
Press to return to the previous screen in the setup menu.
27.
Press to repeat the playback of a selected section.
28.ANGLE button (P.27)
Press to change the camera angle to see the sequence being played back from a different angle (if available).
- FRONT PANEL
| STOP | PLAY |
| EJECT |
MENU | VOLUME |
| CHANNEL | SELECT POWER |
31 | 32 | 33 | 34 | 35 36 37 38 39 |
[Fig. 2]
29.REPEAT button (P.24)
Repeats playback of the current disc, title, chap- ter, group or track.
30.SUBTITLE button (P.26)
Press to select a desired subtitle language.
31.STOP P button (P.19)
Press to stop operation of the disc.
32.MENU button
Press to enter or exit the setup menu of TV/DVD.
33.VOLUME X / Y buttons (P.12)
Press to control the volume level for the DVD and TV.
34.CHANNEL X / Y buttons (P.12)
Press to select memorized channels.
35.SELECT button (P.12)
Press to select to TV mode, external input mode or DVD mode.
36.POWER button (P.12)
Press to turn the power on and off.
37.EJECT N button (P.19)
Press to remove a disc from the unit.
38.Remote sensor window
39.PLAY O button (P.19)
Press to playback of the disc.
INSTALLING THE BATTERIES
1 Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow.
2 Insert 2 “AA” penlight batteries into the bat- tery compartment in the direction indicated by the polarity
3 Replace the cover.
NOTE
BATTERY PRECAUTIONS
•Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device.
•Do not mix different types of batteries together (e.g. Alkaline and
•If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.
•Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.
•We do not recommend the use of universal remote controls. Not all of the functions may be controlled with a universal remote control.
If you decide to use a universal remote control with this unit, please be aware that the code number given may not operate this unit. In this case, please call the manufacturer of the universal remote control.
- 9 - | EN |
