TV SECTION
TV OPERATION AND SETTINGS
POWER PICTURE SELECT EJECT
1 | 2 | 3 |
|
|
|
| CH. |
4 | 5 | 6 |
|
7 | 8 | 9 |
|
SLEEP |
| +100 | VOL. |
| 0 | +10 |
|
SKIP | ZOOM | MUTE | |
| PLAY |
| |
REV |
| FWD | |
| STOP |
| |
| SLOW |
| DISC |
PAUSE |
| MENU | |
|
| ||
DISPLAY |
|
|
|
|
| ENTER |
|
SETUP | TITLE |
| RETURN |
CLEAR | SEARCH MODE | REPEAT | |
•Shaded buttons are used for following operation.
WATCHING A TV PROGRAM
1 Plug the power cord into a standard AC outlet.
NOTE
•If any digits are displayed in the corner of the screen, press [POWER] without unplugging the power cord.
NOTE
For channel number selection with number buttons:
•To select
[0]first. (e.g. Press [0] [2] for channel 2.)
•To select cable channels which are higher than 99, press [+100/+10] first.
(e.g. Press [+100/+10] [2] [5] for channel 125.)
4 Use [VOL. X / Y] to select the desired volume level.
VOL.
VOLUME 20
C C C C C C C C C C C C C C C C
•Press [MUTE] to instantly mute the sound. Press it again to restore the previous volume level.
NOTE
•If you use [CH. K / L] in the DVD mode, you can change the TV channels. Even if you turn off the unit in the DVD mode, when you turn it on again, it will go into the TV mode.
TO WATCH CABLE OR SATELLITE CHANNEL
If the unit is connected to a cable box or satellite box, using [CH. K / L] select CH3 or CH4 accord- ing to the output channel setting of the device and select desired channel on that device.
2 Press [POWER] to turn on the unit.
POWER
3 Use [CH. K / L] to select the desired channel number.
CH.
OR
Use the Number buttons to enter the desired channel number.
1 | 2 | 3 |
4 | 5 | 6 |
7 | 8 | 9 |
|
| +100 |
| 0 | +10 |
TO WATCH EXTERNAL INPUT
When an external equipment is connected to the front AUDIO/VIDEO input jacks, press [SELECT] or [CH. K / L] repeatedly until “VIDEO1” or “VIDEO2” appears on the screen.
NOTE
•If a disc is inside the unit, “DISC INSIDE” mes- sage is displayed on the screen for 10 seconds.
DISC INSIDE
•To clear the message instantly, press [CLEAR].
- 12 - | EN |
