![](/images/new-backgrounds/1088860/8886041x1.webp)
Adjusting the worktop
You can move the worktop forward or backward by 25 mm in order to align the machine with other kitchen units.
Simply unscrew the two rear retaining screws, move the top to the required position and then retighten the screws.
Fitting under a counter
(kitchen worktop or sink)
By removing the machine’s worktop, you can install it under a close fitting sink unit or a
☞Proceed as follows:
Remove the machine’s worktop by unscrewing the two rear retaining screws, pull from the front and slide out the rear slots, lifting the worktop.
Insert the machine after adjusting height and levelling with the adjustable feet. When inserting the machine, ensure that the water inlet and drain hoses are not kinked or squashed.
IN26 |
570⎟ |
600 |
820 |
600 |
IN05 |
43 | PFI05GB |