Zanussi DWS 6726 manual Filling with salt

Filling with salt

If your water is "level 0" it is already soft and therefore there is no need to use salt.

Salt must be used from level 1 upward.

Only use salt specifically designed for use in dishwashers.

Other types of salt may reduce the efficiency of the softener.

Only fill with salt just before starting one of the complete washing programmes (not the Rinse and Hold programme).This will prevent any grains of salt or salty water, which may have been spilled, remaining on the bottom of the machine for any period of time, which may cause corrosion.

☞To fill:

➀To fill with salt, unscrew the cap of the salt container.

➁Pour about 1 litre of water inside the container, or until it is full (this is necessary only before filling with salt for the first time).

➂Then using the funnel provided, pour in the salt until the container is full (approx. 1.5 - 1.8 kg).

Do not worry if water over flows from the unit when filling with salt, this is quite normal.

➃Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket.

➄Screw on the cap tightly.

The salt container will require topping up periodically.

The salt cap has a refill indicator window in the centre.

A green floater is clearly visible when there is salt inside the container, and almost disappears when the salt has finished, (ie. every 30 - 50 washes depending on the setting of the water softener) reminding you to add salt.

SALE

SALT

SALZ

SEL

SR06

SR11

30 PFS01GB