Zanussi DWS 6726 manual Before use, Setting the water softener, To adjust the water softener

Before use

Before using your dishwasher for the first time:

☞ensure that the electrical and water connections comply with the installation instructions

☞remove all packaging from inside the appliance

☞set the water softener

☞fill the salt container

☞fill the rinse aid dispenser.

Setting the water softener

The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance. The higher the content of these salts, the harder your water is.

Water hardness is measured in equivalent scales, for example German, French degrees, and parts per million.

The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority can advise you on the hardness of the water in your area.

The dishwasher is factory set at level 2.

If this level is not suitable for your area the softener should be adjusted.

☞To adjust the water softener:

With a screwdriver turn the selector on the upper front corner of the machine until the level required corresponds with the marker.

		Water hardness
	German		French	PPM		Level	Use of
	degrees		degrees	(Parts per
							salt
	(°dH)		(°TH)	million)
<4			<7	0-80	0		NO
5-11			8-20	81-200	1		SI
12-22			21-40	201-400	2		SI
23-34			41-60	401-600	3		SI
35-50			61-90	601-900	4		SI
51-67			91-120	901-1200	5		SI

3	4
	5
	1
AA05

29 PBU01GB