iDrying sequence
Before starting up for the first time it is advisable lo load a few moist cloths into the dryer and to let it run for about 20 minutes. This ensures that no dust and dirt is left in the drum.
1. Load the laundry
Open the door by pulling the catch forwards.
Load the items one at a time, shaking them out loosely and close the door.
Please check the laundry does not get caught between the door and filter.
2.Select the drying time or the drying programme
Turn the selector dial to the desired programme or time, the
3.Select the required option and start the machine
Depress Buzzer Off and/or Low Temp. Button, if you have to dry synthetics with a time controlled programme.
Depress START button, the machine starts
operating and the drying light 
illuminates.
To change a programme already in progress,
turn the selector dial to «0», select the new programme and then depress START button.
4. When drying is completed
The machine stops automatically. Release the button(s).
Turn the selector dial to «0» , the
Clean the filter after every drying programme. A clean filter ensures correct functioning of the appliance.
P0305 |
M0027 |
P0918
Anticrease phase
If you do not remove the laundry at the end of the programme, after the cooling phase, the machine will carry out automatically the «anticrease» phase which lasts approx 30 mins. During this period the drum will rotate at regular intervals to avoid creasing and the buzzer will sound for 1 second every 10 seconds, unless you have depressed the BUZZER OFF button.
To remove the laundry during this phase it is necessary to switch the machine off by turning the selector dial to «0».
ENGLISH
11
