USE
Control panel
kg 5 A | B | C | kg 2.5 D |
A U T O R E V E R S E
1 | 2 | 3 | 4 5 | 6 7 8 9 | 10 |
1 Programme Chart
This will help you to select the correct programme for drying.
2 Low Temperature Button 
Press this button to reduce the temperature when drying particularly delicate items.
To be used only when drying synthetics with the time controlled programme.
3 Buzzer Off Button 
Press this button if you do not wish the buzzer to ring during the
4 Start Button 
Press this button for a few seconds to start the selected drying programme.
If the door is opened during drying, this button has to be depressed after closing the door to allow the programme to continue.
5 Drying Light 
This light (green) indicates that the machine is performing the drying programme.
6 Cooling phase Light 
This light (green) will illuminate when the cooling phase is in operation. This starts 9 minutes before the end of drying to prevent any creasing or crumpling of fabrics.
7 End of Programme Light 
This light (red) comes on at the end of the drying programme and remains alight until the door is opened.
This light will also remind you that the filter should be cleaned at the end of each drying cycle.
8 Open Door Light 
This light (red) flashes when the door is opened or not well closed.
9 Mains-On Light
This lights up by selecting the programme or time and goes out when the programme selector dial is turned to «0».
10 Programme Selector Dial
To set the machine to the selected programme or time, turn the dial until the letter or the time you want coincides exactly with the pointer.
8
