Unpacking

All transit bolts and packing must be removed before using the appliance.

You are advised to keep all the packaging for re-use in case the machine is to be transported again.

Using a spanner unscrew and remove the rear right bolt. Lay the machine gently on its back, making sure that the hoses are not squashed.

P0255

Remove the polystyrene block from the bottom of the machine and release the two plastic bags.

Carefully slide out the right polythene bag (1). Repeat the operation for the left polythene bag (2).

Positioning

Install the machine on a flat hard floor.

Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Check that the machine does not touch the wall or other kitchen units.

Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor.

Your new washing machine has been designed to be permanently plumbed in to your home’s water supply and drainage system. However, if this is not possible, it may be connected to a suitable existing tap with the drain hose discharging into a sink.

The appliance has an inlet hose, with female 3/4” BSP thread connector. If this connection is not compatible with the plumbing of the existing installation, a variety of connectors are available from good hardware stores and plumbers merchants to suit most domestic plumbing. Any alteration to your existing plumbing must be carried out by a competent person, or qualified plumber.

P1068

2

1

P1066

 

Installation on a Suspended Floor

Suspended wooden floors are particularly susceptible to vibration. To help prevent vibration we recommend you place a waterproof wood panel, at least 15 mm thick under the appliance, secured to at least 2 floor beams with screws. If possible install the appliance in one of the corners of the room, where the floor is more stable.

Water inlet

Remove the polystyrene base.

Set the machine upright and remove the two remaining bolts from the back.

Pull out the three plastic spacers from the holes into which the bolts were fitted.

Plug the open holes with the plugs which you can find in the envelope containing the istruction booklet.

Connect the hose supplied with the machine to a tap with a 3/4” thread.

Do not use already employed hoses.

P0255

P0020

Installation should comply with local water authority and building regulations’ requirements.

The appliance must be connected to a cold water supply.

A minimum water pressure of 50 kPa (0.5 bar) is required for safe operation of the appliance.

28

Page 27 Page 29
Page 28
Image 28
Zanussi WJS 1665 W, WJS 1465 W, WJS 1265 W manual Unpacking, Positioning, Installation on a Suspended Floor, Water inlet
Page 27 Page 29

WJS 1265 W, WJS 1465 W, WJS 1665 W specifications

The Zanussi WJS 1665 W, WJS 1465 W, and WJS 1265 W are three advanced washing machines that exemplify the innovative design and technology that Zanussi is known for. Each model is engineered to provide effective cleaning while ensuring user convenience and energy efficiency.

Starting with the Zanussi WJS 1665 W, this model offers a significant load capacity of 8 kg, making it suitable for large households. Its powerful 1600 RPM spin speed ensures clothes come out drier, reducing drying time. The machine features a variety of washing programs, including a quick wash option that can cleanse lightly soiled items in under 30 minutes, perfect when time is of the essence. The AutoSense technology adjusts the wash time and water consumption based on the load size, promoting energy efficiency while still delivering optimal results.

Next is the Zanussi WJS 1465 W, which has a capacity of 7 kg and is ideal for medium-sized households. This model boasts an impressive energy efficiency rating, contributing to lower utility bills. A highlight of the WJS 1465 W is its innovative Soft Drum system, which is designed to be gentle on fabrics while still providing a thorough clean. Like its counterpart, this model also offers a quick wash program and various specialized cycles for different fabric types, ensuring versatile laundry care.

Lastly, the Zanussi WJS 1265 W is perfect for smaller spaces, featuring a compact design without compromising on functionality. With a 6 kg load capacity, this model is aimed at single users or couples. Despite its size, it includes the same user-friendly controls and efficient wash cycles found in the larger models. The Eco Wash function is especially beneficial for those looking to reduce their environmental impact, combining lower temperatures with optimized cycles for energy savings.

All three models prioritize user convenience with intuitive controls and clear displays, allowing easy selection of settings. They are also designed with noise reduction technology, ensuring quieter operation during washes and spins. With a blend of capacity, efficiency, and innovative features, the Zanussi WJS series offers exceptional solutions to modern laundry needs, making them a reliable choice for any household.
Top Page Image Contents