Zanussi ZBB6286 manual Also make sure that the appliance does not clamp the mains cable

Make sure that a distance of 44 mm is maintained in the lower part between the kitchen furniture and the border of the appliance.

The lower hinge cover inserted in the accessories bag, is useful to guarantee the exact position of the kitchen furniture and the appliance.

Also make sure that the appliance does not clamp the mains cable

Fasten the appliance with 4 screws provided in the kit included with the appliance.

(I = short) (P = long)

Apply the sealing strip pushing it between the refrigerator and the adjacent cabinet.

From the plastic cover (E), which is used to cover the hinge with the pivot pin, you must take away the part as indicated in the drawing.

This operation is made easer since there is, in the internal part of the cover hinge lid a groove that facilates the removal of this coomponent.

“Remove the part marked with DX, if the pivot pin is inserted in the right hinge, SX in opposite case.”

Apply covers (C-D) on joint cover lugs and into hinge holes.

Snap vent grille (B) and hinge covers (E) into position.

1

2

I

P

D724

D	C
	E
E	B

17