Zanussi ZBM 878 manual Oven Cavity, i DO NOT attempt to clean catalytic liners, Grease Filter

Models: ZBM 878

1 30
Download 30 pages 44.25 Kb
Page 24
Image 24
Oven Cavity

Oven Cavity

The enamelled base of the oven cavity is best cleaned whilst the oven is still warm.

Wipe the oven over with a soft cloth soaked in warm soapy water after each use. From time to time it will be necessary to do a more thorough cleaning, using a proprietary oven cleaner.

i DO NOT attempt to clean catalytic liners

Oven Shelves and Shelf Supports

To clean the oven shelves and the shelf supports, soak in warm soapy water and remove stubborn marks with a well wetted soap impregnated pad. Rinse well and dry with a soft cloth.

The shelf supports can be removed for easy cleaning (see diagram). Please, ensure the retaining nuts are secure when refitting the shelf support.

i

When cleaning the shelf supports, take care not

to remove the lubricating grease behind the

 

 

telescopic runners. This is meant to ensure

 

their good operation.

Grease Filter

To prevent a build-up of fats on the fan impellor, the grease filter must be fitted by clipping it over the vents in the back panel.

To clean the grease filter

When the oven has cooled down, remove the filter by pushing the protruding tongue on the filter upward, and wash carefully.

The grease filter should be cleaned after every use. The filter may be washed in a dishwasher on a 65°C wash. If the filter is heavily soiled, place the filter in a saucepan of water with approximately 1 teaspoon of automatic washing powder or dishwasher powder. Bring to the boil and leave to soak for approximately 30 minutes or longer depending on the degree of soiling. Ensure the solution does not boil over as it could mark your hob.

Rinse filter in clear water and dry.

Remember to refit the filter before using the oven again.

FO 0018

25

Page 24
Image 24
Zanussi ZBM 878 Oven Cavity, i DO NOT attempt to clean catalytic liners, Oven Shelves and Shelf Supports, Grease Filter