Before the First Use of the Cooker

Remove all packaging, both inside and outside the oven, before using the oven.

Before first use, the oven should be heated without food. During this time, an unpleasant odour may be emitted. This is quite normal.

☞1. Set the electronic programmer to manual function.

2.Switch the oven function control knob to conventional cooking .

3.Set the thermostat control knob to MAX.

4.Open a window for ventilation.

5.Allow the oven to run empty for approximately 45 minutes.

6.Half way through, reset the oven function control to fan cooking .

This procedure should be repeated with the grill function for approximately 5-10 minutes.

Using the ceramic hob for the first time

The cooking surface should be cleaned before use to remove any traces of the production process.

☞Wipe the ceramic surface and frame with a damp cloth using warm water to which a little

washing up liquid has been added, and wipe dry.

☞To check the cooking zones, briefly switch each one on.

• Always cook with the oven door closed.

•Stand clear when opening the drop down oven door. Do not allow it to fall open - support the door using the door handle, until it is fully open.

i• The oven has four shelf levels, and is supplied with two shelves.

The shelf positions are counted from the bottom of the oven as shown in the diagram.

It is important that these shelves are correctly positioned as shown in the diagram.

•Do not place cookware directly on the oven base.