Answering System
30
For assistance, please visit http://www.panasonic.com/help
until the phone number is shown
in the desired format (page 25).
3{C}
Erasing all messages
1{MENU}
2{V}/{^}: “Answering device”
i {OK}
3{V}/{^}: “Erase all msg.” i
{OK}
4{V}/{^}: “Yes” i {OK} i {OFF}
Remote operation
Using a touch-tone phone, you can call
your phone number from outside and
access the unit to listen to messages or
change answering system settings. The
unit’s voice guidance prompts you to
press certain dial keys to perform
different operations.
Remote access code
A 3-digit remote access code must be
entered when operating the answering
system remotely. This code prevents
unauthorized parties from listening to
your messages remotely. The default
setting is “111”.
Important:
LTo prevent unauthorized access to
this product, we recommend that you
regularly change the remote code.
1{MENU}
2{V}/{^}: “Answering device”
i {OK}
3{V}/{^}: “Settings” i {OK}
4{V}/{^}: “Remote code” i {OK}
5Enter the desired 3-digit remote
access code.
6{OK} i {OFF}
Deactivating remote operation
Press {*} in step 5 on “Remote access
code”, page 30.
LThe entered remote access code is
deleted.
Using the answering system
remotely
1Dial your phone number from a
touch-tone phone.
2After the greeting message starts,
enter your remote access code.
LThe unit announces the number of
new messages.
LThe voice guidance
announcements are different
depending on the voice guidance
language setting (page 14).
3Follow the voice guidance prompts
as necessary or control the unit
using remote commands (page 31).
4When finished, hang up.
Note:
LYou can also leave a message just as
any outside caller can. After the
greeting message starts, press {*} to
skip the greeting message and record
your message after the beep.
Voice guidance
When the English voice guidance is
selected
During remote operation, the unit’s voice
guidance starts and prompts you to
press {1} to perform a specific
operation, or press {2} to listen to more
available operations.
TG401x.book Page 30 Wednesday, December 23, 2009 9:30 AM