Useful Information
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
Display message | Cause/solution |
Busy | L The called unit is in use. |
| L Other units are in use and the system is busy. |
| Try again later. |
| L The handset you are using is too far from the |
| base unit. Move closer and try again. |
| L There is no handset registered to the base |
| unit matching the handset number you |
| entered. |
Error!! | L Recording was too short. Try again.*1 |
No link to base. | L The handset has lost communication with the |
Reconnect main base AC | base unit. Move closer to the base unit and try |
adaptor. | again. |
| L Unplug the base unit’s AC adaptor to reset the |
| unit. Reconnect the adaptor and try again. |
| L The handset’s registration may have been |
| canceled. |
*1
Troubleshooting
If you still have difficulties after following the instructions in this section, disconnect the base unit’s AC adaptor, then reconnect the base unit’s AC adaptor. Remove the batteries from the handset, and then insert the batteries into the handset again.
General use
Problem | Cause/solution |
The handset does not turn | L Place the handset on the base unit or charger to |
on even after installing | turn on the handset. |
charged batteries. |
|
For assistance, please visit http://www.panasonic.com/help | 37 |
