Panasonic KX-TG4022, KX-TG4021, KX-TG4023, KX-TG4011, KX-TG4013N Making/answering calls, intercom

	Useful Information
Making/answering calls, intercom
Problem	Cause/solution
w is flashing.	L The handset is too far from the base unit. Move
	closer.
	L The base unit’s AC adaptor is not properly
	connected. Reconnect AC adaptor to the base
	unit.
	L The handset is not registered to the base unit.
	Register it (page 23).
Noise is heard, sound cuts	L You are using the handset or base unit in an area
in and out.	with high electrical interference. Re-position the
	base unit and use the handset away from sources
	of interference.
	L Move closer to the base unit.
	L If you use a DSL/ADSL service, we recommend
	connecting a DSL/ADSL filter between the base
	unit and the telephone line jack. Contact your
	DSL/ADSL provider for details.
The handset does not ring.	L The ringer volume is turned off. Adjust the ringer
	volume (page 21).
The base unit does not	L The ringer volume is turned off. Adjust the ringer
ring.*1	volume (page 16).
I cannot make a call.	L The dialing mode may be set incorrectly. Change
	the setting (page 14).
	L The handset is too far from the base unit. Move
	closer and try again.
I cannot make long	L Make sure that you have long distance service.
distance calls.
*1 KX-TG4021/KX-TG4071 series: page 3

For assistance, please visit http://www.panasonic.com/help 39