INTRODUCTION

WARNING: THIS COOKER MUST BE EARTHED

RATING PLATE

Record the model, product and serial numbers on the back cover from the rating plate. This is situated on the lower front frame of the cooker and can be seen upon opening the fan oven door.

The cooker must be protected by a suitably rated fuse or circuit breaker. The rating of the cooker is given on the rating plate.

INSTALLATION

If your cooker has been damaged in transit, contact your supplier immediately. DO NOT attempt to install it.

Your cooker left the factory fully packaged to protect it from damage. If it is delivered without packaging and damage has occurred, the manufacturer cannot accept responsibility. Contact your supplier for advice.

Once the packaging has been removed the cooker should only be moved by hand. DO NOT use a sack barrow or any other aid to lift the cooker as damage may occur.

Connection to the electricity supply must be carried out by a qualified electrician/competent person.

The electrical connection should be made using a double pole isolating switch (cooker socket) with at least 3mm contact separation. The cable must have conductors of sufficiently high cross-sectional area to prevent overheating and deterioration.

Six square millimetres (6.00mm²) is the recommended cross-section area.

The cable should be routed away from potentially hot areas marked by X in the diagram below.

To move the cooker, open the fan oven door, and lift the cooker by holding inside the top of the compartment.

This is a type X appliance which means it is free-standing and can be fitted with cabinets on one or both sides. It may also be fitted in a corner setting.

Ensure that the cooker is standing level.

Side walls which are above hob level should be protected by heat resistant non-combustible material and MUST NOT be nearer than 40mm to the hob side.

A nominal air gap of 2mm all around the cooker is required to enable the cooker to be moved into position. It is recommended that proprietary trims are fitted to protect the worktops of either side of the appliance. These are available from most DIY stores.

Two spacers have been incorporated into the back of the appliance to ensure an air gap of 10mm is maintained at hotplate level. Tiles or other forms of deep wall covering should not obscure this gap.

8

Page 7 Page 9
Page 8
Image 8
Zanussi ZCE 7300 manual Introduction, Rating Plate, Installation
Page 7 Page 9

ZCE 7300 specifications

The Zanussi ZCE 7300 is a versatile and efficient electric cooker that combines modern technology with functional design, making it an essential addition to any kitchen. Known for its reliability and user-friendly features, this cooker ensures an enjoyable cooking experience for both novice cooks and seasoned chefs alike.

One of the standout features of the ZCE 7300 is its double oven configuration, offering ample cooking space for a variety of meals. The main oven is equipped with fan-assisted heat, ensuring even cooking and baking results. This is particularly beneficial for those who take pride in creating delicious pastries or roasts, as it minimizes the risk of hot spots and uneven heat distribution. The secondary oven, although smaller, is perfect for side dishes or supplementary items, allowing for multitasking during meal preparation.

The ceramic hob surface of the ZCE 7300 is another highlight, providing a sleek and modern aesthetic. It features four cooking zones, which can accommodate various pot sizes and cooking techniques. The responsive touch controls make it easy to adjust temperatures quickly, while the residual heat indicators ensure safe operation by alerting users when the surface is still hot.

In addition to its cooking capabilities, the Zanussi ZCE 7300 incorporates several innovative technologies aimed at enhancing convenience. The automatic cooking programmer allows users to set cooking times in advance, ensuring that meals are ready when needed without the constant need for monitoring. This feature is especially useful for busy households where time management is essential.

Cleaning is made simple with the ZCE 7300, thanks to its enamel coating that prevents food from sticking and makes wiping down surfaces a breeze. Moreover, the main oven features a removable inner glass door, allowing for easy access during thorough cleaning.

Safety is also a priority with this cooker. Features such as the child safety lock offer peace of mind in families with young children, preventing accidental operation of the oven or hob.

Overall, the Zanussi ZCE 7300 stands out as a practical and efficient cooking solution. With its combination of advanced cooking technologies, spacious ovens, and a stylish design, this cooker is tailored to meet the demands of contemporary home chefs, making it an excellent investment for anyone looking to elevate their culinary skills. Whether baking, roasting, or simply simmering, the ZCE 7300 proves to be a reliable partner in the kitchen.
Top Page Image Contents