LOCATION OF SPLASHBACK / STORAGE BOARD
Splashback and Storage Board Kits are available to purchase from your retailer.
Fix the Splashback drilling 2 holes of 6 mm in diameter in the position shown. See Fig. 1a. Use screws and wall plugs provided in the pack.
To enable the Splashback Board to be fitted, a 2 mm gap between the screw head and wall is required. See Fig. 1b.
Please note that the Splashback may differ in type and shape from that shown in the diagram
Fig. 1a.
Fig. 1b.
Fix the Storage Board drilling 2 holes of 6 mm in diameter in the position shown. See Fig. 1c. Use screws and wall plugs provided in the pack.
To enable the Splashback Board to be fitted, a 2 mm gap between the screw head and wall is required. See Fig. 1d.
Please note that the Storage Board may differ in type and shape from that shown in the diagram
Fig. 1c.
Fig. 1d.
29
