IMPORTANT - SAFETY REQUIREMENTS

This appliance must be installed in accordance with the Gas Safety (Installation and Use) Regulations Current Editions and the I.E.E. Wiring Regulations. Detailed recommendations are contained in the following British Standard Codes of Practice - BS.6172, BS.5440: Part 2 and B.S.6891. All British Standards must be 'Current Editions'.

PROVISION FOR VENTILATION

This appliance is not connected to a combustion products evacuation device. It shall be installed and connected in accordance with the current installation regulations. Particular attention shall be given to the relevant requirements regarding ventilation.

The room containing the appliance should have an air supply in accordance with BS. 5440: Part 2 Current Edition. All rooms require an openable window or equivalent and some rooms will require a permanent vent as well. For room volumes up to 5m³ an air vent of 100cm² is required: for room volumes between 5m³ and 10m³ an air vent of 50cm² is required. If the room has a door that opens directly to the outside, no air vent is required. For room volumes that exceed 11m³ no air vent is required. If there are other fuel burning appliances in the same room, BS.5440: Part 2 Current Edition should be consulted to determine the requisite air vent requirements.

Prolonged intensive use of the appliance may call for additional ventilation, for example opening a window, or more effective ventilation, for example increasing the level of mechanical ventilation where present.

LOCATION OF APPLIANCE

This appliance must not be installed in a bed-sitting room of volume less than 20m³ or in a bathroom or shower room. It is essential that the appliance is positioned as stated below (see Fig. 1a) i.e. shelves, wall cabinets and cooker hoods must be fitted a minimum of 787mm directly above the top of hotplate and 400mm above the hotplate when fitted in line with the outside of the appliance. If the units are intended to be fitted adjacent to the appliance but less than 400mm above the hotplate, then a minimum space of 100mm must be maintained between the sides of the unit and the appliance (see Fig.1b). Curtains must not be fitted immediately behind the appliance or within 150mm of the sides of the hotplate. If fitted next to or between two base units a minimum space of 1mm must be left between each unit and the sides of the appliance. The levelling feet fitted to the appliance will achieve a nominal height to hotplate trims of 900mm +20mm.

400

787

787

less

 

100

than 400

Fig. 1a

All dimensions in mm

Fig. 1b

 

 

 

 

 

43

Page 41 Page 43
Page 42
Image 42
Zanussi ZCG 6600 manual Important Safety Requirements, Provision for Ventilation, Location of Appliance
Page 41 Page 43

ZCG 6600 specifications

The Zanussi ZCG 6600 is a gas cooker that encapsulates efficiency, style, and advanced cooking technology. Designed for both novice cooks and culinary enthusiasts, this model offers a host of features that enhance the cooking experience while ensuring safety and performance.

One of the standout features of the Zanussi ZCG 6600 is its versatile hob configuration. It comes equipped with four gas burners of varying sizes, enabling users to accommodate different pot sizes simultaneously. The powerful burners provide rapid heat-up times, ideal for quick meals, while the smaller burners are perfect for simmering sauces or preparing delicate dishes.

The cooker also boasts an efficient gas oven, which provides ample cooking space with its generous capacity. The oven is equipped with a fan-assisted convection feature that allows for even heat distribution, ensuring that dishes cook evenly. This feature is particularly beneficial for baking, where consistent temperatures are crucial for achieving the perfect rise in cakes or pastries.

A key technological advancement in the Zanussi ZCG 6600 is its built-in safety features, including a flame failure device. This feature ensures that if a burner flame goes out, the gas supply is automatically cut off, providing peace of mind during cooking. Additionally, the appliance incorporates a removable oven door and easy-to-clean enamel interior, promoting hassle-free maintenance.

The design of the Zanussi ZCG 6600 harmonizes functionality with aesthetics. Its sleek stainless steel finish and simple controls lend a modern touch to any kitchen environment. The easy-to-use control knobs ensure precise temperature management, allowing for a more controlled cooking experience.

Furthermore, this cooker is designed with energy efficiency in mind. It complies with energy standards, making it a cost-effective choice for households focused on reducing their energy consumption without compromising on performance.

In summary, the Zanussi ZCG 6600 is a robust gas cooker that combines a range of features tailored for effective cooking, safety, and ease of use. Its powerful burners, spacious oven, and modern design make it a valuable addition to any kitchen, meeting the needs of diverse cooking styles while ensuring a user-friendly experience. Whether it's for daily meals or special occasions, the Zanussi ZCG 6600 stands out as a reliable cooking companion.
Top Page Image Contents