INSTALLATION

1. PARTS REQUIRED

The loose hotplate parts are packed in the polystyrene fitment on top of the hotplate.

2. LEVELLING THE APPLIANCE

If the appliance requires levelling or its height adjusting (from the hotplate to any working surface), the procedure below must be followed:

If the appliance requires levelling or its height adjusting (from the hotplate to any working surface), the procedure below must be followed:

1.Adjustment to suit floor conditions or height is obtained by rotating clockwise or anticlockwise the feet, at the front and rear of the appliance.

2.A spirit level should be placed on one of the oven shelves to confirm the appliance is correctly levelled.

3.FITTING THE STABILITY BRACKET

It is recommended that if the appliance is to be installed with a flexible supply pipe a stability bracket (SK.4729.A) is fitted and is available from your supplier (see Important Safety Requirements, Page 43). These instructions should be read in conjunction with the leaflet packed with the stability bracket.

1.Place the appliance in its intended position and level appliance.

2.Mark off 300mm from the left hand side of the appliance as shown in dimension 'A', Fig 2a. This is the centre line of the fixing bracket.

3.Draw a line 100mm from the front edge of the levelling feet (see Fig.2a) and remove appliance from its position. Mark off dimension 'B' (see Fig.2a) back from this line on the centre line of the bracket to locate the front edge of the lower bracket. Fix lower bracket (with two fixing holes) to the floor then measure the height from floor level to engagement edge on back of appliance, dimension 'C' of Fig.2b.

4.Assemble upper bracket to lower bracket so that underside of bracket is dimension 'C' +3mm above floor level.

Reposition appliance and check that top bracket engages into appliance back as shown in Fig. 2b.

487mm (B)

100mm (C)

(A)

300mm

Fig. 2a

Fig.2b

44

Page 42 Page 44
Page 43
Image 43
Zanussi ZCG 6600 manual Parts Required, Levelling the Appliance, Fitting the Stability Bracket
Page 42 Page 44

ZCG 6600 specifications

The Zanussi ZCG 6600 is a gas cooker that encapsulates efficiency, style, and advanced cooking technology. Designed for both novice cooks and culinary enthusiasts, this model offers a host of features that enhance the cooking experience while ensuring safety and performance.

One of the standout features of the Zanussi ZCG 6600 is its versatile hob configuration. It comes equipped with four gas burners of varying sizes, enabling users to accommodate different pot sizes simultaneously. The powerful burners provide rapid heat-up times, ideal for quick meals, while the smaller burners are perfect for simmering sauces or preparing delicate dishes.

The cooker also boasts an efficient gas oven, which provides ample cooking space with its generous capacity. The oven is equipped with a fan-assisted convection feature that allows for even heat distribution, ensuring that dishes cook evenly. This feature is particularly beneficial for baking, where consistent temperatures are crucial for achieving the perfect rise in cakes or pastries.

A key technological advancement in the Zanussi ZCG 6600 is its built-in safety features, including a flame failure device. This feature ensures that if a burner flame goes out, the gas supply is automatically cut off, providing peace of mind during cooking. Additionally, the appliance incorporates a removable oven door and easy-to-clean enamel interior, promoting hassle-free maintenance.

The design of the Zanussi ZCG 6600 harmonizes functionality with aesthetics. Its sleek stainless steel finish and simple controls lend a modern touch to any kitchen environment. The easy-to-use control knobs ensure precise temperature management, allowing for a more controlled cooking experience.

Furthermore, this cooker is designed with energy efficiency in mind. It complies with energy standards, making it a cost-effective choice for households focused on reducing their energy consumption without compromising on performance.

In summary, the Zanussi ZCG 6600 is a robust gas cooker that combines a range of features tailored for effective cooking, safety, and ease of use. Its powerful burners, spacious oven, and modern design make it a valuable addition to any kitchen, meeting the needs of diverse cooking styles while ensuring a user-friendly experience. Whether it's for daily meals or special occasions, the Zanussi ZCG 6600 stands out as a reliable cooking companion.
Top Page Image Contents