4. CONNECTING TO GAS

This appliance is designed to be installed with an appliance flexible connection only. Supply piping should not be less that R³/8. Connection is made to the Rc ½ (½" B.S.P.) female threaded entry pipe located just below the hotplate level on the rear left hand side of the appliance. NOTE:

ONLY LIQUID SEALANT'S TO BE USED WHEN INLET GAS PIPE IS FITTED TO RESET VALVE I.E.: DO NOT USE P.T.F.E. SEALANT TAPE.

Carry out a gas tightness test after connecting to the gas supply.

The gas bayonet connector must be fitted in the shaded area indicated in Fig.3. Take into account that it must be possible to pull the appliance forward sufficiently. The hose must not get caught on the stability bracket.

IMPORTANT: FLEXIBLE TUBING USED MUST COMPLY WITH BS. 669 CURRENT EDITION.

L.P.G. FLEXIBLE CONNECTIONS MUST BE OF A TYPE SUITABLE FOR L.P.G. AND CAPABLE OF OPERATION UP TO 50 mbar AND TO CARRY A RED STRIPE, BAND OR LABEL.

5. CONNECTION TO THE ELECTRICITY SUPPLY

WARNING: THIS APPLIANCE MUST BE EARTHED. DO NOT EARTH THIS APPLIANCE TO THE GAS SUPPLY PIPING.

This appliance must be connected to 230V-240V A.C. 50Hz supply. It is supplied with 2 metres of 5 amp 3 core cable incorporating a moulded 13 amp plug , fitted with a 3 amp fuse, which can be plugged directly into the nearest suitable socket. Ensure the plug is accessible to the user. If this is not long enough, the supply cable can be replaced totally by a longer cable at least 0.75mm² nominal cross sectional area (24/0.2mm).

IF THE MOULDED PLUG IS CUT FROM THE CABLE FOR ANY REASON, IT MUST BE DESTROYED OR DISPOSED OF SAFELY, AS THE PROTRUDING WIRES WILL BE AN ELECTRIC SHOCK HAZARD.

If any other type of plug is used it should incorporate a 3 amp fuse in either the plug or adapter or at the distribution board.

If the cable has to be threaded through small apertures in cabinets etc., it may be disconnected from the appliance, then re-connected to as shown in Fig.4.

50 100

850

250

All dimensions in mm

Fig.3

700

450

Fig.4

DO NOT EXTEND THE CABLE USING PLASTIC OR CERAMIC CONNECTION TERMINAL BLOCKS AND/OR INSULATION TAPE.

ALL EXTERNAL WIRING BETWEEN THE APPLIANCE AND THE ELECTRICAL SUPPLY SHALL COMPLY WITH I.E.E. WIRING REGULATIONS.

48

Page 48
Image 48
Zanussi ZCG 7551X manual Connecting to GAS, Connection to the Electricity Supply

ZCG 7551X specifications

The Zanussi ZCG 7551X is a multifaceted gas cooker designed to enhance the cooking experience in both modern and traditional kitchens. With its impressive features, this cooker stands out for its efficiency, reliability, and user-friendly design.

At the core of the Zanussi ZCG 7551X is a powerful gas cooking system. It features four gas burners of varying sizes, offering optimal flexibility for all types of cooking needs. The high-efficiency burners ensure that heat is evenly distributed, allowing for a quick boil or a gentle simmer depending on the recipe. The hob's design also incorporates safety mechanisms such as flame failure devices, which automatically cut off the gas supply if the flame goes out, ensuring a safer cooking environment.

The Zanussi ZCG 7551X features an integrated oven with a capacity of 60 liters, providing ample cooking space for family meals or entertaining guests. The oven is equipped with both conventional and fan-assisted cooking options, allowing for even heat distribution and faster cooking times. The oven's design includes easy-to-use controls and an efficient interior that makes it simple to monitor and adjust cooking progress.

One notable aspect of this cooker is its multifunctional capabilities. With settings that support baking, grilling, and roasting, the Zanussi ZCG 7551X encourages culinary creativity. Additionally, the handy timer function helps to ensure that meals are cooked to perfection without the risk of overcooking.

Maintenance is another area where the Zanussi ZCG 7551X excels. The cooker features removable oven shelves, making it easier to clean up after cooking. The oven cavity is designed with a smooth enamel finish, which simplifies the cleaning process, allowing for more time to be spent enjoying meals rather than cleaning up.

The aesthetic appeal of the Zanussi ZCG 7551X is marked by its stylish stainless steel finish, which not only adds a modern touch to any kitchen but also provides durability. The cooker’s design is complemented by easy-to-use controls that are intuitively laid out, ensuring that users can shift seamlessly between different cooking functions.

In summary, the Zanussi ZCG 7551X combines functionality, safety, and style in one comprehensive package, making it a great choice for those looking for a reliable and versatile gas cooker. Whether you are a seasoned chef or a home cook, this cooker delivers on performance, safety, and ease of use.