Manuals / Zanussi / Kitchen Appliance / Cooktop

Zanussi ZCG 7690 manual Connecting to GAS, Connection to the Electricity Supply

Models: ZCG 7690

1 56
Download 56 pages 4.7 Kb
Page 48
Image 48

4. CONNECTING TO GAS

This appliance is designed to be installed with an appliance flexible connection only. Supply piping should not be less that R³/8. Connection is made to the Rc ½ (½" B.S.P.) female threaded entry pipe located just below the hotplate level on the rear left hand side of the appliance. NOTE:

ONLY LIQUID SEALANTS TO BE USED WHEN INLET GAS PIPE IS FITTED TO SHUT OFF VALVE I.E.: DO NOT USE P.T.F.E. SEALANT TAPE. Carry out a gas tightness test after connecting to the gas supply.

The gas bayonet connector must be fitted in the shaded area indicated in Fig.3. Take into account that it must be possible to pull the appliance forward sufficiently. The hose must not get caught on the stability bracket.

IMPORTANT: FLEXIBLE TUBING USED MUST COMPLY WITH BS. 669 CURRENT EDITION.

L.P.G. FLEXIBLE CONNECTIONS MUST BE OF A TYPE SUITABLE FOR L.P.G. AND CAPABLE OF OPERATION UP TO 50 mbar AND TO CARRY A RED STRIPE, BAND OR LABEL.

50 100

Fig.3

850

700

250

450

All dimensions in mm

 

5. CONNECTION TO THE ELECTRICITY SUPPLY

WARNING: THIS APPLIANCE MUST BE EARTHED.

DO NOT EARTH THIS APPLIANCE TO THE GAS

Fig.4

SUPPLY PIPING.

 

This appliance must be connected to 230V-240V A.C.

 

50Hz supply. It is supplied with 2 metres of 5 amp 3 core

 

cable incorporating a moulded 13 amp plug , fitted with a

 

3 amp fuse, which can be plugged directly into the

 

nearest suitable socket. Ensure the plug is accessible to

 

the user. If this is not long enough, the supply cable can

 

be replaced totally by a longer cable at least 0.75mm²

 

nominal cross sectional area (24/0.2mm).

 

IF THE MOULDED PLUG IS CUT FROM THE CABLE

FOR ANY REASON, IT MUST BE DESTROYED OR

DISPOSED OF SAFELY, AS THE PROTRUDING

WIRES WILL BE AN ELECTRIC SHOCK HAZARD.

If any other type of plug is used it should incorporate a 3 amp fuse in either the plug or adapter or at the distribution board.

If the cable has to be threaded through small apertures in cabinets etc., it may be disconnected from the appliance, then re-connected to as shown in Fig.4.

DO NOT EXTEND THE CABLE USING PLASTIC OR CERAMIC CONNECTION TERMINAL BLOCKS AND/OR INSULATION TAPE.

ALL EXTERNAL WIRING BETWEEN THE APPLIANCE AND THE ELECTRICAL SUPPLY SHALL COMPLY WITH I.E.E. WIRING REGULATIONS.

48

Page 47 Page 49
Page 48
Image 48
Zanussi ZCG 7690 manual Connecting to GAS, Connection to the Electricity Supply
Page 47 Page 49

ZCG 7690 specifications

The Zanussi ZCG 7690 is a versatile and efficient gas cooker designed to meet the culinary needs of modern households. Renowned for its reliability and functionality, this model combines various features that enhance cooking performance while ensuring user convenience.

One of the main features of the ZCG 7690 is its powerful gas hob. The cooker is equipped with four gas burners, providing ample space for simultaneous cooking. Each burner offers a range of heat settings, allowing users to achieve precise temperature control. The burner sizes cater to different cooking requirements, from rapid boiling to gentle simmering, making it an ideal choice for various recipes.

The design of the Zanussi ZCG 7690 is user-friendly, featuring easy-to-use rotary knobs that allow for straightforward adjustment of flame strength. Additionally, the gas burners come with an automatic ignition system, which ensures that lighting the burners is quick and hassle-free. Safety is a priority; hence, the cooker includes a flame failure device that cuts off the gas supply if the flame goes out, providing peace of mind during meal preparation.

In terms of the oven compartment, the ZCG 7690 boasts a spacious capacity that can accommodate multiple dishes at once. The oven features conventional cooking technology, ensuring even heat distribution for consistent cooking results. Users can take advantage of various cooking methods, including baking, roasting, and grilling. The oven is also equipped with a timer function, helping home chefs keep track of cooking times for different dishes.

Cleaning and maintenance of the Zanussi ZCG 7690 have been simplified with its easy-to-clean enamel oven interior and removable oven shelves. The hob surface is designed to be durable and easy to wipe, ensuring that spills and splatters do not become a hassle.

Overall, the Zanussi ZCG 7690 represents a perfect blend of functionality and style. With its robust construction, efficient gas cooking technology, and user-friendly features, it is a reliable choice for any kitchen. Whether you are preparing a quick family meal or hosting a dinner gathering, this cooker adapts to your culinary needs, making cooking enjoyable and effortless. The combination of safety features, ample cooking space, and efficient performance makes the ZCG 7690 a preferred option for both novice cooks and seasoned chefs alike.