Positioning the Cooker

Caution:

Some soft or badly fitted floor coverings can be damaged when the cooker is moved across their surface for cleaning. It is advisable to ensure that the floor covering in the area below the cooker is either securely fixed so as not to ruck up when the cooker is moved or, if preferred, removed.

Installation

 

 

D

 

 

C

 

780

E

115

420

 

 

 

 

B

 

 

 

 

A

 

FO 1141

 

 

 

Fig. 1

The appliance must be installed in accordance to the type X (standard EN 60335-2-6).

Therefore the appliance can not be installed beside furniture higher than the cooker worktop.

Positioning the Appliance (Fig. 1)

Note A:

The appliance is designed to be flush fitted with 2mm clearance at each side to allow for it to be pulled forward for cleaning etc.

Note B:

The hotplate side trims should be flush with the cabinets and must not be below. Adjustable levelling feet at the front and rear are provided on the base of the appliance. Adjustment is obtained by rotating in or out, the feet at the front or rear of the appliance from the underside of the appliance.

A spirit level should be placed on a cake tray on one of the shelves to confirm that the appliance is correctly levelled.

The levelling feet fitted to the appliance will achieve a height to hotplate trims of 900mm-0 + 10.

Note C:

If the appliance is fitted next to a side wall or cabinets above height of the hotplate trims, then a gap of 115 mm is required.

Curtains must not be fitted immediately behind the cooker or within 115 mm of the sides of the cooker.

Note D:

Any wall cabinet or extractor must not be lower than 780mm above hotplate level.

Note E:

Wall cabinets may be fitted in line with the sides of the base units, providing that the lower edge of the wall cabinet is a minimum of 420mm above the worktop.

20

Page 20
Image 20
Zanussi ZCM 611 manual Positioning the Cooker, Positioning the Appliance Fig

ZCM 611 specifications

The Zanussi ZCM 611 is a versatile and highly efficient cooking appliance that brings convenience and performance to your kitchen. This gas cooking range is designed with a variety of features that cater to the needs of both amateur cooks and culinary enthusiasts alike.

One of the standout features of the Zanussi ZCM 611 is its four gas burners, which provide a range of heat settings for different cooking techniques. Whether you are simmering sauces, boiling pasta, or frying, the efficient burners distribute heat evenly, allowing for precise cooking. The front-left burner is particularly powerful, making it ideal for quick heating and searing.

The main body of the range is constructed from stainless steel, a material known for its durability and easy maintenance. This not only gives the appliance a sleek and modern look but also ensures that it stands up to the daily rigors of kitchen use. The enameled cast iron pan supports are another practical feature, providing a stable and robust surface for your cookware, preventing wobbling and ensuring safety during use.

The Zanussi ZCM 611 also incorporates an easy-clean design, with removable burner caps and a smooth surface that makes cleaning a breeze. This is particularly beneficial in a busy kitchen environment where quick and efficient maintenance is essential. The appliance’s control knobs are located at the front, allowing for easy access and adjustments without reaching over hot surfaces.

In addition to these features, the Zanussi ZCM 611 is equipped with an integrated oven, providing additional functionality for baking and roasting. The oven is spacious and designed for even heat distribution, ensuring that your dishes cook evenly. With several cooking programs available, users can choose the best setting for their specific dish, enhancing the overall cooking experience.

The safety features in the Zanussi ZCM 611 are also commendable, including flame failure devices that shut off the gas supply if the flame goes out, enhancing the safety of your cooking.

Overall, the Zanussi ZCM 611 is a robust choice for anyone looking to upgrade their kitchen appliances. With its combination of powerful burners, user-friendly design, easy maintenance, and safety features, it is engineered to meet the demands of everyday cooking while delivering exceptional results. For those who value quality and efficiency in their kitchen, the Zanussi ZCM 611 is a reliable and stylish option that stands out in the market.