If there are other fuel burning appliances in the same room, B.S. 5440: Part. 2: Current Editions should be consulted to determine the requisite air vent requirements.

Location

The cooker may be located in a kitchen, a kitchen/diner or bedsitting room but not in a bathroom, shower room or garage.

For information regarding the fitting of flexible supply pipes, the highest temperature at the rear of this cooker which may come into contact with the supply pipe is 70°C above ambient.

When the appliance has been installed there must be enough space fot the hotplate lid (when present) to open fully.

Positioning the Cooker

Caution:

Some soft or badly fitted floor coverings can be damaged when the cooker is moved across their surface for cleaning. It is advisable to ensure that the floor covering in the area below the cooker is either securely fixed so as not to ruck up when the cooker is moved or, if preferred, removed.

Installation

 

 

D

 

 

C

 

780

E

115

420

 

 

 

 

B

 

 

 

 

A

 

FO 1141

 

 

 

Dimensions are given in millimeters

Fig. 1

The appliance must be installed in accordance to the type X (standard EN 60335-2-6).

Therefore the appliance cannot be installed beside furniture higher than the cooker worktop.

This cooker must only be installed by qualified personnel, according to the manufacturer’s instructions and to the relevant British Standards.

1.PositioningtheAppliance (Fig. 1)

Note A:

The appliance is designed to be flush fitted with 2mm clearance at each side to allow for it to be pulled forward for cleaning etc.

Note B:

The hotplate side trims should be flush with the cabinets and must not be below. Adjustable levelling feet at the front and rear are provided on the base of the appliance. Adjustment is obtained by rotating in or out, the feet at the front or rear of the appliance from the underside of the appliance, with the drawer removed.

A spirit level should be placed on a cake tray on one of the shelves to confirm that the appliance is correctly levelled.

The levelling feet fitted to the appliance will achieve a height to hotplate trims of 900mm-0 + 10.

Note C:

If the appliance is fitted next to a side wall or cabinets above height of the hotplate trims, then a gap of 115 mm is required.

Curtains must not be fitted immediately behind the cooker or within 115 mm of the sides of the cooker.

Note D:

Any wall cabinet or extractor must not be lower than 780mm above hotplate level.

Note E:

Wall cabinets may be fitted in line with the sides of the base units, providing that the lower edge of the wall cabinet is a minimum of 420mm above the worktop.

23

Page 22 Page 24
Page 23
Image 23
Zanussi ZCM 630 manual Location, Positioning the Cooker, PositioningtheAppliance Fig
Page 22 Page 24

ZCM 630 specifications

The Zanussi ZCM 630 is a modern and efficient freestanding cooker, meticulously designed to enhance your cooking experience. Combining functionality with a sleek aesthetic, this appliance showcases a range of features and technologies that cater to both novice cooks and seasoned chefs alike.

One of the standout features of the Zanussi ZCM 630 is its dual fuel design, which pairs a gas hob with an electric oven. This combination offers the best of both worlds - the precise temperature control of gas cooking for your stovetop and the consistent, even heat of an electric oven. The hob includes four burners, with varying sizes to accommodate different pot and pan sizes, allowing for flexibility while cooking multiple dishes simultaneously. Additionally, the front-mounted controls make it easy to adjust heat levels with precision.

The oven of the ZCM 630 is generously sized, providing ample space for baking, roasting, and broiling. It boasts a range of cooking functions, including fan-assisted cooking, which circulates heat for even cooking results. This feature is particularly beneficial for baking, ensuring evenly risen cakes and perfectly cooked pastries. The oven also presents a grill function, ideal for achieving that satisfying browning on top of your dishes.

Cleaning is made easy with the Zanussi ZCM 630, thanks to its catalytic liners. These liners work by breaking down grease and food splatters at high temperatures, reducing the need for manual scrubbing. This innovative technology ensures that your oven remains in pristine condition with minimal effort.

In terms of safety, the ZCM 630 is equipped with flame failure devices on its gas burners. This safety feature automatically cuts off the gas supply if the flame goes out, providing peace of mind during cooking.

Furthermore, the cooker features a large viewing window and internal lighting, allowing users to monitor cooking progress without the need to frequently open the door and release heat.

Overall, the Zanussi ZCM 630 stands out not only for its stylish design but also for its practical features and modern technologies. Ideal for families or individuals who enjoy cooking, this freestanding cooker combines performance and convenience, making it an excellent addition to any kitchen.
Top Page Image Contents