300 mm.

 

 

WALL FACE

 

 

 

 

 

 

 

BACK OF COOKER

580 mm.

mm.

 

 

ENGAGEMENT EDGE FOR

LEVELLING FEET

 

STABILITY BRACKET

 

100

 

 

 

 

 

 

 

 

A

BASE OF COOKER

 

 

 

 

 

PENCIL LINE ON THE FLOOR

 

 

 

 

 

295 mm.

 

 

 

PLAN VIEW OF THE COOKER

 

SIDE VIEW

FO 0179

 

OF THE COOKER

 

 

 

 

Fig. 2

Fitting the Stability Bracket (Not supplied)

If the cooker has to be installed with a flexible supply pipe, it is necessary that a stability device is fitted. (See "Important Safety Requirements").

The stability bracket should be fitted by the installer and these instructions should be read in conjunction with the leaflet packed with the stability bracket.

Place cooker in its intended position and level cooker.

Mark off 295mm (11 1/2") from the right hand side of the cooker as shown, this is the centre line of the bracket fixing.

Draw a line 100mm (4") from the front edge of the levelling feet (see Fig. 1) and remove cooker from its position. Mark off 580mm (23") back from this line on the centre line of the bracket to locate the front edge of the lower bracket.

Fix lower bracket (with two fixing holes) to the floor, then measure height from floor level to engagement edge on back of cooker, dimension 'A' of Fig. 2.

Assemble upper bracket to lower bracket so that underside of bracket is dimension 'A' +3mm (1/8") above floor level. Re-position cooker and check that top bracket engages into cooker back to a depth of 75mm (3"), as shown in Fig. 2.

Should the stability bracket currently installed not allow the cooker to stand correctly, ask the installer to replace it with the correct type.

Connecting to Gas

This cooker is designed to be installed with an appliance flexible connection. Connection is made to the RC 1/2 (1/2" B.S.P.) threaded entry pipe located just below the hotplate level on the rear right-hand side of the cooker. Check for gas soundness after connecting the gas supply.

The gas bayonet connector must be fitted in the shaded area indicated in Fig. 3. Take into account that it must be possible to pull the cooker forward sufficiently. The hose must not get caught on the stability bracket.

Note:

If using different types of gas bayonet connection, it may not be possible for the appliance to be pushed fully back to the wall stops.

Important:

Flexible tubing MUST comply with BS.669 Current Edition.

600

 

 

450

 

130

FO 0180

Fig. 3

17

Page 16 Page 18
Page 17
Image 17
Zanussi ZCM 640 ZCM 641 manual Fitting the Stability Bracket Not supplied, Connecting to Gas
Page 16 Page 18

ZCM 640 ZCM 641 specifications

The Zanussi ZCM 640 and ZCM 641 are both high-performing cookers designed to meet the needs of modern households. Offering a combination of functionality, efficiency, and user-friendly technology, these models stand out in the realm of home cooking appliances.

One of the primary features of the Zanussi ZCM 640 and ZCM 641 is their versatile cooking options. Equipped with four gas burners, these cookers provide multiple cooking zones, allowing for simultaneous preparation of multiple dishes. The burners come in different sizes, accommodating everything from quick boiling of water to simmering delicate sauces. Furthermore, the models feature a robust and spacious oven, ensuring ample cooking space for large meals or multiple dishes at once.

Both models are built with safety in mind. They come equipped with flame failure devices that automatically cut off the gas supply if the flame goes out, providing peace of mind while cooking. The cookers also feature an easy-to-clean enamel interior, which allows for hassle-free maintenance after cooking sessions.

The Zanussi ZCM 640 and ZCM 641 incorporate cutting-edge technology that enhances the cooking experience. The integrated electronic ignition system ensures quick and easy lighting of the burners, eliminating the need for matches or lighters. Additionally, the models boast a grill function that allows for perfect browning and crisping, ideal for everything from cheesy dishes to roasted vegetables.

Another key characteristic of these cookers is their aesthetic appeal. Both models are designed with a sleek and modern finish, which complements various kitchen styles. The user-friendly control knobs are strategically placed for easy access, providing precise control over cooking temperatures.

In terms of energy efficiency, the Zanussi ZCM 640 and ZCM 641 are designed to help reduce energy consumption while delivering reliable performance. With optimized burner designs, these cookers enable quick heat-up times, saving both energy and time in the kitchen.

Overall, the Zanussi ZCM 640 and ZCM 641 are an excellent choice for those seeking a reliable and efficient cooker. With their versatile cooking options, user-friendly technology, and emphasis on safety, these models cater to a wide range of culinary needs, making them valuable additions to any kitchen. Whether you are preparing everyday meals or hosting special occasions, these cookers are designed to deliver consistent results and enhance your cooking experience.
Top Page Image Contents