Technical specification | GB |
model | ZCR135R |
|
|
net volume | 379 l |
|
|
width | 595 mm |
|
|
height | 1800 mm |
|
|
depth | 600 mm |
|
|
energy consumption | 248 kwh/year |
|
|
energy class | B |
|
|
rated power | 110 W |
|
|
weight | 68 kg |
|
|
number of compressors | 1 |
|
|
*This figure is based on standard test resultd to the European Standard EN153. Actual consumption will depend on how the appliance is used and where it is located.
Installation | GB |
Unpacking
Unpack the cabinet and check that it is in good condition and free of any transport damage. Notify the dealer immediately of any damage. Hand the packaging over for recycling.
Do not allow children to play with the packaging. The plastic film can cause suffocation.
Removing the transport supports
Remove the tape and the transport supports from
·the door sides
·inside the door hinges
·the shelves
Remove the transport support on the glass shelf by pushing the support forward along the edge of the shelf until it stops at the protuberance of the shelf.
Take hold of the rear edge of the glass shelf and pull the shelf and transport support forward until the shelf tilts and the transport support can be removed. Some models are fitted with a silencing pad under the cabinet. Do not remove this pad.
Cleaning
Wash the inside of the cabinet using lukewarm water and bicarbonate of soda (5 ml to 0,5 litre of water).
Zanussi 818 14
14
