Zanussi ZCR135R manual External Cleaning, Defrosting the fridge, To Change the Light Bulb

Discconnect the appliance from electricity supply. Clean out the drip channel inside the fridge at regular intervals and ensure that the drip channel is clear at all times. If blocked carefully clear using a piece of flexible curtain wire inserted into the drain outlet to remove the blockage.

External Cleaning

Wash the outer cabinet with warm soapy water. Remove the ventilation grille (see the section "Removing the ventilation grille") and vacuum-clean under the cabinet. Once or twice a year dust the condenser (black grille) and the compressor at the back of the appliance, with a brush or vacuum cleaner, as an accumulation of dust will affect the performance of the appliance and cause excessive electricity consumption.

Defrosting the fridge

The fridge is defrosted automatically every time the compressor stops. Frost formation can be prevented by:

·not putting warm foodstuff inside the cabinet.

·avoiding frequently opening the door or keeping it open too long.

·not placing foodstuffs directly against the cold cooling plate.

To Change the Light Bulb

The light is switched on automatically when the door is opened. Before replacing the light bulb, disconnect the power plug from the outlet.

Press the spring together and push the grille downward at the same time.

Use a bulb of the same type, E14 socket, maximum rating of 25 W.

When the appliance is not in use

Discconnect the appliance from electricity supply. Empty all foods and clean the appliance, leaving the doors ajar to prevent unpleasant smells.

When moving the cabinet, lift it by the front edge to avoid scratching the floor.

Zanussi 818 14 54-03/7

8