Important!

Do not use the appliance without fil- ters.

Cleaning the condenser unit Clean the condenser when light “Condenser” comes on.

The condenser is situated at the lower part of the cabinet behind a small door. To open the door, push the catch as per picture.

During the drying cycle or at the end, it is normal for water to be present on the sur- face of the condenser insertion.

To pull out the condenser, first turn the two red stops downwards and then remove the condenser unit holding it at the handle.

Clean it with a brush and rinse it under the shower if necessary. Also clean the outside, removing all fluff. Clean the rub- ber seal round the condenser cabinet and in the inner part of the small door with a damp cloth.

Important

Do not use pointed objects or utensils to clean the spaces between the plates, as this could damage the condenser and make it permeable. Re-fit the condenser, turn the red stops upwards and close the door.

Important!

Do not use this appliance if the con- denser has not been fitted.

Emptying the water reservoir

Water extracted from the laundry condenses inside the machine and is collected in a reservoir. The reservoir must be emptied after each drying cycle to ensure efficient operation when the machine is next used. The pilot light Empty tank reminds you of this

14

Page 14
Image 14
Zanussi ZDC37100W user manual Emptying the water reservoir