operation. Proceed as follows:
•Open the small door at the lower part of the cabinet
•Turn the yellow stop upwards
•Pull out the reservoir
•Open the small cover and let water flow down
•Close the small cover and
•Push it until it clicks and turn the yellow stop downwards to firmly lock it.
•Close the small door and press the Empty tank button again to allow the programme to continue.
P1203
The reservoir must be re-insert- ed correctly.
If this is not done the pilot light Empty tank comes on during next drying and the programme stops, leaving the laundry damp. The buzzer will sound for 1 minute.
After emptying and inserting the reservoir the Start/Pause button has to be depressed again to allow the programme to continue.
Handy tip: The condensed water may be used in a steam iron or to top up a battery, etc. In this case it must be
filtered (e.g. through a coffee filter).
Cleaning the air intake grille Using a vacuum cleaner remove the fluff from the air intake grille at the back of the appliance.
Cleaning the drum
When your laundry does not reach the desired degree of dryness, in other words, when it turns out either too dry or too damp, we advise you to clean the inside of the drum with a cloth soaked with vinegar. This will eliminate the slight patina that has formed in the drum (due to residues of detergent and softeners used in the washing, and to the lime contained in the water), which prevents the probes from detecting the correct degree of dryness.
15
