Door reversal
To make it easier to load or unload the laundry the door can be reversed.
Important:
Reversing the door is not possible if after this operation the appliance result installed behind a door with a hinge on the opposite side to that of the appliance.
This operation must be carried out by qualified personnel. Please contact the nearest Service Centre.
Electrical connection
This machine is designed to operate on a 230 - 240 V,
Connect the machine to an earthed socket, in accordance with current wiring regulations.
Important:
The manufacturer declines any responsibility for damage or injury through failure to comply with the above safety precaution. Should the appliance power supply cable need to be replaced, this must be carried out by our Service Centre.
Important:
Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance’s rating plate. (See picture on page 5).
The appliance is supplied with a 13amp plug fitted.
In the event of having to change the fuse in the plug supplied, a 13amp ASTA approved (BS1362) fuse must be used.
Should the plug need to be replaced for any reason, proceed as described below.
The wires in the mains lead are coloured in accordance with the following code:
Green and Yellow | - Earth |
Blue | - Neutral |
Brown | - Live |
GREEN & YELLOW
E
| 13 A |
N | L |
|
BROWN
BLUE
| CORD CLAMP | |
P1041 | ||
|
The wire coloured green and yellow must be connected to the terminal marked with the letter «E» or by the earth symbol
or coloured green and yellow.
The wire coloured green and yellow must be connected to the terminal marked with the letter «E» or by the earth symbol or coloured green and yellow.
The power supply cable must be accessible after installing the machine..
WARNING:
A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard.
Ensure that the cut off plug is disposed of safely.
22
