Zanussi ZDC 67550W user manual Drum turns alternately in both direc- tions during drying

125987350.qxp 2007-01-09 15:02 Page 10

10electrolux use

Press this button to start the dryer after having selected the programme and the options.

The relevant light will stop flashing.

If the programme selector dial is turned to another position, when the machine is running, the buzzer will sound and the programme phase indicator lights will flash.

The drum turns alternately in both direc- tions during drying.

All drying programmes end with a 10 minute cooling phase (light Cooling is on).

You may remove the laundry after this phase.

The lights End/Anticrease, Filter and Empty Tank illuminate and the buzzer sounds

If the door of the appliance or the smalldoor at the bottom is opened while theprogramme is running, this button mustbe pressed again after closing the doorin order to restart the programme fromthe point at which it was interrupted.This button must be depressed alsoafter a power failure and after having re-inserted the water reservoir, if it hasbeen emptied in the middle of a pro-gramme after the Empty Tank light illuminates.

In both cases the light of the Start/Pause button flashes to remind you that the start button needs to be pressed again.

Select the Delay Start

This button allows you to delay the starting of the programme by 3, 6 or 9 hours.

Press the button until the light relevant

to the desired delay illuminates. This option must be selected after having

selected the programme and before pressing START/PAUSE to start the programme.

The machine begins the countdown, which is shown by the pilot lights. For example, if you have chosen a 9-hour delay (pilot light 9h lit), after 3 hours, 9h goes out and 6h lights up; after 3 more hours, 6h goes out and 3h lights up.

When the 9 hours are over (pilot light 3h off), the drying cycle begins.During the delayed start period, it is not possible to change the programme or the selected delay. If you wish to do so, you must first cancel everything by rotating the pro- gramme selector dial to position “Off”. Select the new programme, the options and the delayed start, then press START/PAUSE. If you wish to change

only the options, this can be done on the condition that the new option(s) is(are) compatible with the programme. Set the machine to PAUSE by depressing the rel- evant button, select the new option(s) and depress START/PAUSE button again.

If you wish to add some laundry while the machine is performing the countdown, after having done so and having closed the door, press START/PAUSE again, in order to allow the machine to complete the remaining countdown time.

Indicator lights

These lights indicate the following functions:

“Drying” light

This light indicates that the appliance is in the drying phase.

“Cooling” light

This light indicates that the appliance is in the cooling phase. At the end of drying, there is a 10 minute cooling phase to cool the